![]() |
Where's the reset button on a Delta Unisaw? - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Where's the reset button on a Delta Unisaw? (/showthread.php?tid=7330132) |
Where's the reset button on a Delta Unisaw? - Dumb_Polack - 05-10-2017 Hi Fellas, Been a while since I've been on this board. (The password reset thing wasn't working, so I created a new registration). Anywho, I think I overload the Unisaw I acquired last year and it won't turn on. I'm guessing it is a 970s model, but that's a guess. Where is the reset button on this beast? thanks! RE: Where's the reset button on a Delta Unisaw? - AgGEM - 05-10-2017 1. I have no idea. 2. Good to see you back! 3. Ag RE: Where's the reset button on a Delta Unisaw? - MarkSingleton - 05-10-2017 Wild guess, on the motor? RE: Where's the reset button on a Delta Unisaw? - Roly - 05-10-2017 If it has a magnetic starter the overloads are on the contactor, not in the motor. Unplug remove cover on starter and look for a reset button , do not adjust the setting but the reset will be close. Roly RE: Where's the reset button on a Delta Unisaw? - EdL - 05-10-2017 If the saw has low voltage controls, inside the big box on the back of the saw, its the red button. ![]() Ed RE: Where's the reset button on a Delta Unisaw? - Ohio Mike - 05-10-2017 Push the OFF button to its full depth. That's how I reset my 1994 Unisaw with 3hp motor and magnetic switch. Mike RE: Where's the reset button on a Delta Unisaw? - Dumb_Polack - 05-11-2017 Silly me....I looked at the back of the saw (I built an extension table off the back, so it was tough to see) and guess what I found??? Yup, the reset button. Some things never change, eh? ![]() RE: Where's the reset button on a Delta Unisaw? - cvillewood - 05-11-2017 What's your handle again? ;-) RE: Where's the reset button on a Delta Unisaw? - Steve N - 05-13-2017 Funny, not too neighborly, but still funny. Welcome back Polack. |