+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Dj20 with ? Issue (/showthread.php?tid=7342629)
Dj20 with ? Issue - Bill Mains - 09-21-2018
Notice that outside end of clutter head can be deflected .001 inch. Is this normal or do I have a problem? If a problem, how to fix? Thanks..Bill in SD
RE: Dj20 with ? Issue - jteneyck - 09-21-2018
Take the belt off and check both sides. If they are both the same I'd say you have no problem as long as the bearings aren't talking.
John
RE: Dj20 with ? Issue - BloomingtonMike - 09-23-2018
This is 1/5 of the thickness of a piece of paper. I doubt your knife height is even set that accurately on a DJ20.
RE: Dj20 with ? Issue - alanealane - 09-24-2018
Yeah I'd tend to think you're ok. A relatively fine shaving with my hand plane and measured .005" thick. For perspective it would take 200 perfect passes at .005" to remove one inch of wood
