Posts: 9,534
Threads: 0
Joined: Jan 2005
Location: Orlando FL
I don't have much left Uni wise. Just an older Rockwell miter gauge and a couple of throat plates. CJ is welcome to them if he wants them. What else is needed?
Posts: 40,215
Threads: 1
Joined: Nov 2004
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
Posts: 40,215
Threads: 1
Joined: Nov 2004
Throat plates would be good--looks like the owner used his for sandpaper testing
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
Posts: 9,374
Threads: 0
Joined: Aug 2002
I like the Delta Switch!
My Boss is a Jewish Carpenter!
Posts: 9,374
Threads: 0
Joined: Aug 2002
I will be going to school in the morning so I may not reply back to any PM's till the evening.
My Boss is a Jewish Carpenter!
Posts: 6,291
Threads: 0
Joined: Jul 2005
Location: Knoxville
Confirmed via PMs w/ Charles, the black Delta switch it is. Lumber Yard, I'll get you out a check pronto.
Bill
Know, think, choose, do -- Ender's Shadow
Posts: 9,534
Threads: 0
Joined: Jan 2005
Location: Orlando FL
Posts: 9,374
Threads: 0
Joined: Aug 2002
You is going to sent to me or bones?
My Boss is a Jewish Carpenter!
Posts: 9,374
Threads: 0
Joined: Aug 2002
What size are the rails I pefer 30'' because of my small shop.
My Boss is a Jewish Carpenter!
Posts: 40,215
Threads: 1
Joined: Nov 2004
We are still lookig for the rails.
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
GOOD DEED 2008: The beginningwoodworker/Unisaw Project
