Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
The painting of the office, that is.......I had to read that several times to be sure....
They look great!
Ag
Posts: 1,945
Threads: 0
Joined: Feb 2008
AgGEM said:
The painting of the office, that is.......I had to read that several times to be sure....
They look great!
Ag
Oh you mean vs painting these? Yeah, that would be over my dead body! The finishing schedule i used on these was . . . involved. So if they ever get painted it will have to be after I've left this world!
You don't need a parachute to go skydiving unless you want to do it more than once. . .
Posts: 1,945
Threads: 0
Joined: Feb 2008
SeaBee1 said:
Very nice! I really like the cove crown. Was it done with hand tools or machine? And if by hand, what tools?
Best regards
CB
Thanks CB. This was my first cove of this size and it was cut on the tablesaw using the angled-fence technique. Once roughed in I cleaned them up with a goose-neck scraper which was the clear ticket for a cove like this.
I have everything I need for a half-set of molding planes so someday I will hopefully be making my moldings with those, but for now the marching orders are house furniture and not more tools
Reed
You don't need a parachute to go skydiving unless you want to do it more than once. . .
Posts: 1,945
Threads: 0
Joined: Feb 2008
Philip1231 said:
Very nice! What was the finish?
Oyyy.
BLO for color
Shellac to seal (sprayed)
4 coats satin WB lacquer (sprayed)
Paste wax applied with 0000 steel wool and then buffed out
I'd like to say it was a labor of love! I've really come to hate shellac... Its so fricking sticky and sanding it is impossible. Next time I spray I'm buying sanding sealer!
You don't need a parachute to go skydiving unless you want to do it more than once. . .
Posts: 2,274
Threads: 90
Joined: Jun 2001
Nicely done. I don't think Shaker ever goes out of style.
John
Always use the right tool for the job.
We need to clean house.
Posts: 10,003
Threads: 1
Joined: Apr 2005
Location: Texas
Those are beautiful! Design and execution.
I need some in my house.
Do you have any sketch up drawings or plans you would be willing to share?
...Naval Aviators, that had balz made of brass and the size of bowling balls, getting shot off the deck at night, in heavy seas, hoping that when they leave the deck that the ship is pointed towards the sky and not the water.
AD1 T. O. Cronkhite
Posts: 1,945
Threads: 0
Joined: Feb 2008
Martin S. said:
Those are beautiful! Design and execution.
I need some in my house.
Do you have any sketch up drawings or plans you would be willing to share?
Sure. Just PM me your email and I'll send you the file. its not as pretty as DaveR1's, but it's all components and I've pulled dimensions on nearly everything. You'll notice that there's a version in there where the two were joined side-to-side after building and then dressed with a single molding. I opted against that for purposes of movability.
You don't need a parachute to go skydiving unless you want to do it more than once. . .
Posts: 12,858
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Wow, those are stunning, from the design, to the wood, to the finish; and the knobs look great, too, being the right proportion for the piece. They look like something Becksvoort would have made.
John
Posts: 712
Threads: 0
Joined: Feb 2013
Nice job Reed
Finishing was a pain but at least you've found your new favorite sandpaper
Rusty
Poppa's Woodworks
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Really nice work Reed. I love Shaker, but even saying that, those are very nice.
Worst thing they can do is cook ya and eat ya
GW
