04-06-2017, 08:53 PM
I've got the long extension table on a Grizzly1023 TS. For years I've had my router insert at the far end of the table but that leaves me a little cramped on that end with a bunch of other shop junk behind me. I also thought I'd slide my TS fence down there and clamp my RT fence to it, but that extension wing is really just a junk collector so that fence never made it down there and I now mount the RT fence to T tracks recessed in the extension.
Anyway, anyone have their router plate mounted towards the front of the saw (right of the blade) so you'd be running your stock parallel to the front rail? I guess in this orientation, I'd have to move the TS fence all the way left or completely remove it (and keep my extension table pretty clean)
Paul
Anyway, anyone have their router plate mounted towards the front of the saw (right of the blade) so you'd be running your stock parallel to the front rail? I guess in this orientation, I'd have to move the TS fence all the way left or completely remove it (and keep my extension table pretty clean)
Paul