03-12-2018, 11:29 AM
I am just about done with the remodel in the half-bath in my home. Wainscoting is in, the toilet and sink are out. The old mosaic floor tile has been chipped out. I just need to level the surface (I have a few divots from an over-enthusiastic hammer drill
not my fault). The walls and ceiling are painted, and all new trim around the window and door.
I am planning on putting down Cararra marble 12" x 12" tile. I will need to lay down just 35 tiles, so this is not a big job. But I will need a saw.
I have one other bathroom to do and then I will probably retire the saw. But since I work slowly I don't want to rent.
Durability will not be the issue, nor will be the speed of the cut. But I do want an accurate and solid fence or guide system.
Recommendations? I'd like to keep it under $250.00 if possible.
not my fault). The walls and ceiling are painted, and all new trim around the window and door.
I am planning on putting down Cararra marble 12" x 12" tile. I will need to lay down just 35 tiles, so this is not a big job. But I will need a saw.
I have one other bathroom to do and then I will probably retire the saw. But since I work slowly I don't want to rent.
Durability will not be the issue, nor will be the speed of the cut. But I do want an accurate and solid fence or guide system.
Recommendations? I'd like to keep it under $250.00 if possible.
No animals were injured or killed in the production of this post.