...attach this live edge shelf to this sofa table I'm building.
This is the downfall not using any plans and building things from ideas in you head and you just start making something.
I was thinking one of the following:
1. 2 dowels on each end of the shelf to stand the shelf off of the inside of the legs. Run a 2" X 1" thick support on the underside.
2. Dado the shelf into the legs.
3. Run 2-2" X 1" thick supports left to right and just sit the shelf on top of them then attach it from the underside. The legs are 4" wide and the shelf is roughly 6" wide at the ends.
I'm open to other ideas as well. Thanks in advance.
[attachment=11400]
[attachment=11401]
This is the downfall not using any plans and building things from ideas in you head and you just start making something.
I was thinking one of the following:
1. 2 dowels on each end of the shelf to stand the shelf off of the inside of the legs. Run a 2" X 1" thick support on the underside.
2. Dado the shelf into the legs.
3. Run 2-2" X 1" thick supports left to right and just sit the shelf on top of them then attach it from the underside. The legs are 4" wide and the shelf is roughly 6" wide at the ends.
I'm open to other ideas as well. Thanks in advance.
[attachment=11400]
[attachment=11401]