03-17-2019, 07:55 PM
After much debate last fall I finally ordered a hammer k3 winner, 48x79. There was a request or 2 for arrival pics so here is the updat. Unit arrived after the first of the year. I did dockpick up so I could inspect it before accepting. All packing was in perfect condition so I had it loaded on to my trailer. Was able to handle the crate with an engine hoist and ceiling mounted 900 lb hoist. Handled the saw on to the base with the ceiling hoist. I put it on a Grizzly bear crawl. Assembly of the tables and fence took some time. Followed the online videos so no issues. Only had to set the rip fence scale. Everything else seemed to be dead on. I made th3 fritz and franz jig first and have done a couple smaller projects so for. I really like the saw the adjustment to different operation methods is not an issue. With3 the f&f jig I don’t rip against th3 rip fence. Here are some pics of the sa2 and jig
Thanks
Gary
Thanks
Gary