02-17-2021, 02:00 PM
Finally got around to building a rack for my turning tools. Looked at several options and came up with this one. I have it set up for 20 tools. The upper pieces are easily remade if I add more in the future.
Sandpaper rolls from Klingspor 80-400 are hanging from one continuous dowel with 3/8" spacers between
Ended up putting my SB angle gauges on the other end.
Got tired of my gouges and such rolling around in drawers so now everything is out and at arms reach as they should be!
The wall is ship lap poplar I made for my turning area and have already started getting my chucks and layout tools hung up there as well.
[attachment=33360]
Sandpaper rolls from Klingspor 80-400 are hanging from one continuous dowel with 3/8" spacers between
Ended up putting my SB angle gauges on the other end.
Got tired of my gouges and such rolling around in drawers so now everything is out and at arms reach as they should be!
The wall is ship lap poplar I made for my turning area and have already started getting my chucks and layout tools hung up there as well.
[attachment=33360]
"This is our chance, this our lives, this is our planet we're standing on. Use your choice, use your voice, you can save our tomorrows now." - eV