06-11-2021, 10:40 AM
I have a 14" Jet bandsaw with the stock blade guide set-up I was replacing the blade and noticed the bearing (for the back of the blade) on the lower guide system was not rotating freely. Feels like it is gunked up pretty bad.
1. Does anyone know if they are a common size that I can find at the local hardware store?
2. Should I just go ahead and upgrade the guide system, and what would be a good upgrade?
1. Does anyone know if they are a common size that I can find at the local hardware store?
2. Should I just go ahead and upgrade the guide system, and what would be a good upgrade?