01-14-2013, 01:59 PM
Well some more tool porn:
Just finished up this Atlas last week. It really isn't finished as it is still missing a return spring housing, spring and cover. Not the original motor or motor mount. Rustoleum metalic dark bronze, chrome on the dome. The "tinman"
" />
From the begining of the winter in rustoleum hammered grey.
" />
Restoration of grandfathers power king lathe in hammered metalic green.
" />
This came from a good friend. Two tone paint hammered grey on the cast parts and dark machine grey for the stand both rustoleum.
" />
Add another 40-440 to the post. It was my first old arn, first delta tool, and first step down a slippery slope. Rustoleum dark machine grey.
" />
The haviest and largest project is a walker turner radial drill press that is a long ways down the project list. I added a new table and VFD to it and just put it to work.
Just finished up this Atlas last week. It really isn't finished as it is still missing a return spring housing, spring and cover. Not the original motor or motor mount. Rustoleum metalic dark bronze, chrome on the dome. The "tinman"
From the begining of the winter in rustoleum hammered grey.
Restoration of grandfathers power king lathe in hammered metalic green.
This came from a good friend. Two tone paint hammered grey on the cast parts and dark machine grey for the stand both rustoleum.
Add another 40-440 to the post. It was my first old arn, first delta tool, and first step down a slippery slope. Rustoleum dark machine grey.
The haviest and largest project is a walker turner radial drill press that is a long ways down the project list. I added a new table and VFD to it and just put it to work.
My .02
Karl
Karl