Posts: 9,459
Threads: 0
Joined: Dec 2004
Does your zoning dictate how many sq non primary residence you can have?
40X64X16 2560sq and a 2 car detached 1000sq is where I am at. Its a long transition.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 12,564
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
My last 2 shops were 24x28x9, and 24x32x8. That size was really comfortable (for a hobbyist), and I would have given up the extra 4 feet on the second one to have the higher ceiling. But we've moved and I have one under construction at the moment. It's 32x50x10, but at least 20' of it (maybe more) will replace a pole barn we used to have. That part will hold the tractor attachments,etc, and allow for car tinkering.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 6,179
Threads: 0
Joined: Dec 2002
Location: Bothell, WA
When my dad was renting out some commercial space for his remodel business I found it very adequate (3000 ft^2). My 746 ft^2 garage is woefully inadequate even though no cars occupy any of the space. I have too little space for all the wood I have. My grandad stored a lot of lumber in his house for lack of space, but the wife isn't having any of that.
I think if I had 1200 ft^2 it would be adequate.
Cellulose runs through my veins!
Posts: 5,411
Threads: 0
Joined: Jun 2001
Location: Troy IL
lay out your shop on paper the way it is now, lay out shop the way you would like it to be and submit to wife. Doubling your size is a good place to start.
leave space to add tools.
Life is what you make of it, change your thinking, change your life!
Don's woodshop
Posts: 2,416
Threads: 0
Joined: Jun 2003
Location: Charlotte NC
This question is like asking how much money would you like to have???
My first shop was 750sq ft and was just big enough. My second shop was something like 32 by 70 with 12 ft ceilings and a second story storage area of 1000ft. That shop felt like the right size. Discovered then I like to hoard wood. Lost that shop and was shopless for a few years.
Now I am in a 480sq ft two car garage and its working ok... just wish I had room for one more stationary tool...a woodmaster drumsander. Really miss that tool. ....I do have a spare bedroom right behind the garage that would be easy to expand into but the wife doesn't like that idea. It would give me an extra 250 ft which would allow me to get my sander and more lumber.
Posts: 1,539
Threads: 0
Joined: Oct 2003
Location: Columbus, Ohio
I have a 24' x 24' detached garage (576') with not quite 8' ceilings. I am happy with the shop but it is full. I only have room for one more machine and that's going to be one of John's horizontal mortisers. If I were able to build a shop it would be at least 1200' with 12' ceiling. (The 12' ceiling brings many advantages and doesn't add a lot to the cost of the building.) That would give me room to have a dedicated finish area, a larger lumber area, and a boys room with utility sink.
Lonnie
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
09-06-2016, 12:53 PM
(This post was last modified: 09-06-2016, 12:54 PM by Bibliophile 13.)
I work in pretty cramped space, but I make do. Here are three random observations about shop design.
1. Consider the height of the ceiling and not just the square footage. I have a 9' ceiling in my main workspace, and it's great to be able to spin an 8' board around. It also means I have ample wall space for storage racks, etc. I wouldn't want a lower ceiling, but I think a higher one would be wasted space.
2. Consider infeed/outfeed on your big machines. I can just run an 8' board through my bandsaw. It's tight, but I can do it. A long, narrow shop space (which is what I have) can work much better than you might think. If I had to choose between a square footprint and a long rectangle, I'd take the long rectangle in a heartbeat.
3. Adding floorspace does not solve the clutter problem. Ever. Whatever you build, you will fill it to capacity (and probably more) unless you make a constant, conscious effort to limit the amount of stuff you collect/retain. So as you're building, it's a good time to ask yourself what you really need--what you're likely to use a lot in the next 5-10 years--and what you're just hanging on to for no good reason. Moving into a new shop usually reveals just how much junk we've been hanging onto. It's always way more than we actually need. Let this be a time to divest yourself of little-used and unused tools and materials, not just a time to fill a new space with your old junk.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 3,755
Threads: 0
Joined: Feb 2005
(09-05-2016, 06:09 PM)daddo Wrote: 32 x 40 would work for me. I want to be able to pull a vehicle in during bad weather and do the maintenance and repairs.
Everyone is different but this is about the size of mine and it just about right. I wish my garage door was in a different location but the size is good.
I have found how much a boat is used is inversely related to how much it weighs.
Kudzu Craft Lightweight kayaks
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
(09-06-2016, 12:58 PM)Kudzu Wrote: Everyone is different but this is about the size of mine and it just about right. I wish my garage door was in a different location but the size is good.
Where is your door and where would you prefer it to be?
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)