02-10-2017, 11:41 AM
Anchoring in Concrete Help Needed
|
02-10-2017, 03:56 PM
02-10-2017, 03:59 PM
(02-10-2017, 12:10 AM)MstrCarpenter Wrote: Does Ken have a riding lawn mower? That and three or four broom handles (or any kind of pipe, even PVC) will have it up the driveway and in the garage in a matter of minutes. I moved my 36" old iron band saw about 15' with nothing more than two Wonder bars and a handful of deep sockets. This is not really a tough project, but I do suggest some type of wheels or rollers. Even two or three H.F. furniture dollies at less than $10 each will work. Yes, he does, but that wouldn't have enough pull to get it off the truck unless we first pried it up and put pipes under it. Could work, though I prefer the winch on my car as it has better control and a lot more pulling power. Thanks. John
getting it up high enough for pipes can be done with a small bottle jack and some blocking. Do it little by little shim as you go if you are worried about procedure.
If you have access to a johnson bar like the one I pointed to before it is all you need to get it up on 1/2" black pipe from there 3/4" is not a problem. Probably as big as I would go with that machine and you can use if for pipe clamps when you are done
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
02-11-2017, 08:20 AM
(02-09-2017, 07:36 PM)jteneyck Wrote: OK, time for some additional info. to aid understanding of the situation. This thing is 10' long, weighs 1620 lbs by itself and likely 1800 lbs on its skids, and is top heavy as all jointers are. The seller is a super nice guy and will put the monster on a skid of 4 x 4's. There will be a base of 8 footers, 2 about 45" apart and one half way in between. On top of them will be four or five 4' ones, cross wise. This will make a wide, stable base. The machine will be bolted to the cross pieces. The cross pieces at the ends will not be under the machine, so they will be easy for us to wrap a cable or chain around to pull it. You already have a plan, so referring to your question- Yes, the concrete will hold with a good anchoring system rated for the weight. I would rate at X2 or even X3 for the occasional "jerking" and such. I would keep the anchor point at least 2 feet from any edge of the concrete slab to be on the safe side.
02-20-2017, 03:42 PM
So how was it or is it still to come?
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
02-20-2017, 04:45 PM
(02-20-2017, 03:42 PM)Bob10 Wrote: So how was it or is it still to come? THanks for asking. It's supposed to be picked up any minute now by UPS Freight and be delivered on Thursday via a lift gate truck. Assuming we are able to get the monster turned sideways onto the lift gate, we should be good to go to winch it up the driveway and into Ken's garage. Wish us luck. I'm going to install the winch point in the garage floor tomorrow, and layout my cables and chains to make sure that part of the game plan is all set. I'll update the adventure when it happens. John
02-20-2017, 07:24 PM
I just got an E-mail from the guy Ken bought the jointer from in western MI; very nice guy, to be sure. Here's what the jointer, a 16" Zefam (made in Poland and very much the same as some Martins and SCMI models; in fact, Zefam probably made them) looked like on the skid he made for it.
The fence is inside the plywood box. As you can see, he has pretty good sized forklift, so putting it on the UPS Freight truck was no issue. The schedule at this end is Thursday. More to follow when it happens. John
02-20-2017, 07:31 PM
..
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020
02-21-2017, 07:23 AM
(This post was last modified: 02-21-2017, 07:24 AM by fredhargis.)
What an awesome jointer....good luck with the move. Ken definitely owes you a case of beer. What did you decide to do for the anchor, the rod stuck in angled holes?
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
|
|
Users browsing this thread: 1 Guest(s)