Woodnet Forums
Woodnet Forums
>
>
Active
>
Woodworking
> Cutting tiny wedges?
Full Version:
Cutting tiny wedges?
You're currently viewing a stripped down version of our content.
View the full version
with proper formatting.
Aram
09-07-2015, 03:16 PM
I'm making wedged tenons, and need 4 wedges. I've done this before, but never so small: 1/4" tenon thickness, and 3/8" length. Any thoughts on best methods?
Thanks!
JGrout
09-07-2015, 03:52 PM
bandsaw cut them from 4/4 about a third longer than you need
then split them in two pieces
drive them home remove the excess
Gary G™
09-07-2015, 04:06 PM
Handsaw, bandsaw, or even a scroll saw.
YSU65
09-07-2015, 05:51 PM
If you have a tenon jig, tilt it and cut them on the TS.
Aram
09-07-2015, 06:44 PM
Thanks, everyone.
Woodnet Forums
>
>
Active
>
Woodworking
> Cutting tiny wedges?