03-12-2019, 11:05 PM
Found a use for a bit of the Pine leftovers....1 x 8 as a shelf, and a 1 x 6 to make a couple "legs" for the shelf to stand on..
Spent half the time going between the Kitchen, and the shop....so....
[attachment=17267]
back side of the shelf needed a notch cut. To fit around a window sill/ledge/stool
Simple three countersink screws to attach the legs...
legs got a bit curvy....
[attachment=17268]
then I found out I needed to notch for the backsplash.....haul it to the shop, backsaw to make one crosscut, mallet and chisel to pop the waste off...and back upstairs to check the fits...
[attachment=17269]
One more test fit...needed to remove a saw blade's with at the back, so things fit better around the shelf....will let the Boss paint this the colour she wants...
6 screws, a bead or two of glue....and a few scraps of pine. I think that will do for today..
Spent half the time going between the Kitchen, and the shop....so....
[attachment=17267]
back side of the shelf needed a notch cut. To fit around a window sill/ledge/stool
Simple three countersink screws to attach the legs...legs got a bit curvy....
[attachment=17268]
then I found out I needed to notch for the backsplash.....haul it to the shop, backsaw to make one crosscut, mallet and chisel to pop the waste off...and back upstairs to check the fits...
[attachment=17269]
One more test fit...needed to remove a saw blade's with at the back, so things fit better around the shelf....will let the Boss paint this the colour she wants...
6 screws, a bead or two of glue....and a few scraps of pine. I think that will do for today..
