i picked up a used Biesemeyer Assembly, consisting of:
- Fence
- Front mounting rail and main rail.
Can't use it, because it is too big.
Here is a link to craigslist with photos.
craigslist
I listed it there for 160, will knock off $10 for woodnetters
(12-06-2019, 12:46 AM)dspeer Wrote: [ -> ]i picked up a used Biesemeyer Assembly, consisting of:
- Fence
- Front mounting rail and main rail.
Can't use it, because it is too big.
Here is a link to craigslist with photos. craigslist
I listed it there for 160, will knock off $10 for woodnetters
I know it shows up if you look at the craigslist link but it would be helpful for those potentially interested if you indicate your location. Good luck selling it!
These are easy enough to shorten if the length is the only thing keeping you from using it. Just cut the rails and done.
Great price btw.
(12-06-2019, 02:00 PM)BloomingtonMike Wrote: [ -> ]These are easy enough to shorten if the length is the only thing keeping you from using it. Just cut the rails and done.
Great price btw
I've considered that, but there is also no back rail, so no.
Sent you a pm on the fence
It’s easy enough to make a back railif that’s all that’s holding you back.
Back and front rails are just angle iron. Tube is just a tube. I used generic steel tubing (3/16" wall!) and angle iron for my Jet, Bies. style fence. Solid as a rock.