Woodnet Forums

1. This is a user set of 7 socket chisels. The sizes are 1/4, 3/8, 1/2, 3/4, 1”, 1 1/4, 1 1/2. Three of the chisels are Greenlee and the others are unmarked. All have been ground but need honing. No rust or pitting and no chips in the edges. Reduced to $30

2. 1” Stanley chisel with no handle. Not marked as such but it looks like a 750. Blade is 5 1/2” long. Reduced to $8

3. Stanley knuckle cap block plane. Number is not marked but I think it is a #18. No rust and most of the japanning. Everything works and in good condition. Reduced to $20

4. Parts for a flat side Bedrock 605: complete frog assembly with hardware, blade, chip breaker and lever cap. There is a chip in the front edge of the lever cap. Appears to be from a Type 7 Bedrock. Reduced to $20

5. 1/8” tang mortise chisel. No maker mark. Free with any other purchase

6. 1/8” socket mortise chisel. No maker mark. Free with any other purchase
[attachment=35815]
[attachment=35816]
[attachment=35817]
Prices are plus shipping. Let me know if you have questions.

Prices Reduced. Let me know if you have questions.
Thanks, Tom

I am amazed these are still available.  They look to be a great buy for someone who doesn't already have too many chisels.

(06-18-2021, 12:13 PM)Alan S Wrote: [ -> ]I am amazed these are still available.  They look to be a great buy for someone who doesn't already have too many chisels.

I have too many chisels and I am still thinking about it!  That is less than $5 for a vintage chisel.

PM sent................

Frank S in IA

pm sent re 1" Stanley chisel.
Jeff

(06-18-2021, 01:45 PM)ChuckHill Wrote: [ -> ]I have too many chisels and I am still thinking about it!  That is less than $5 for a vintage chisel.

Yuuuuuuuuup

The chisels are sold. The Bedrock frog is still available. Tom