![]() |
SOLD: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: SOLD: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt (/showthread.php?tid=7373064) Pages:
1
2
|
SOLD: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - Philip1231 - 05-20-2023 SOLD: This Delta Rockwell Model 37-290 4” Jointer has been completely rebuilt. It was completely disassembled and each part was cleaned and degreased. Painted parts received a new coat of industrial finish that is an exact match of the original Delta gray. Bare metal parts were cleaned a polished. New cutter head bearings were installed, as well as new cutter head knives. The motor was disassembled and new bearings were installed, in addition to repainting each of the component parts. Finally, a new belt was installed. I doubt you will come across many machine restorations done to this level. A piece of old American iron made in Pennsylvania in the late 1960’s/early 1970’s. If you gravitate toward old American Made Delta/Rockwell equipment, you will not be disappointed by this unit. Local pickup in the greater Hartford Connecticut area. $495 SOLD ![]() ![]() ![]() ![]() ![]() ![]() RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - iclark - 05-21-2023 That is an absolutely gorgeous restoration effort. Someone is going to be very lucky to have it in their shop. RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - kwadams - 05-22-2023 Agree, I saw this unit in person (Phil and I are neighbors) and it is better than new. I’d be all over it if I hadn’t just bought the same unit a few weeks ago and wish I hadn’t so I could buy Phil’s. The level of detail he puts in to his restorations is second to none. Kevin RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - Admiral - 05-22-2023 Nice job, well done! RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - Snipe Hunter - 05-24-2023 Wow!!!!!!!!!!!!!! RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - john jesseph - 05-25-2023 I’m hoping Kevin can drive it to Indiana for me ??? I’d be tickled to utilize that jointer. RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - kwadams - 05-26-2023 Hey John!! I should’ve driven out to buy that Conover lathe from you! Hope all is well. And this is such a nice jointer and super handy for putting a quick edge on most wood anyone would work. Kevin RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - Yotie - 05-26-2023 Beautifully done! Nice work. GLWS RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - john jesseph - 05-26-2023 Hi Kevin, I still have that lathe in storage, I’ll give you a fantastic deal on it! I am between shops currently… RE: Delta Rockwell Model 37-290 4” Jointer: Completely Rebuilt - Philip1231 - 06-01-2023 Thanks for the kudos! This build went so well that I decided to build another one, but this time I installed a Byrd SHELIX cutter head. I still need to order the motor pulley and belt, but it's essentially done. And I am done with machine restoration for a while: back to making sawdust. ![]() |