+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Daily Bench Shot (/showthread.php?tid=7336585)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
RE: Daily Bench Shot - Stwood_ - 02-19-2019
(02-19-2019, 08:17 PM)Redman Wrote: Small dollies huh. I'll need to look for those.
Worthless helper laying down on the job there between the hammer and pencil? And you gotta quit leaving them gloves out in plain sight. You'll never find them on that pick up bed. VOE, BTDT
New brown helper, sitting on the pad.
(02-19-2019, 08:34 PM)Philip1231 Wrote: Nothing but dovetails today:
Lotsa sawing going on there...
RE: Daily Bench Shot - Redman - 02-20-2019
(02-19-2019, 11:43 PM)Stwood_ Wrote: New brown helper, sitting on the pad.
I saw that. Thought it might be some kind of puzzle or key part. Must be pink eraser by the hammer.
RE: Daily Bench Shot - Stwood_ - 02-20-2019
Making some shelf pullouts. Was band sawing the front hand holds and....K-Pow!!!!!!!!
Thought I broke a blade. Nope.......
Put the blade back on, spun the wheel to align the blade before I tension-ed it and ...pow!!!
It d-tensioned again. I've got something going on with the upper wheel tensioner. Hafta to pull the wheel to even see in there.
[attachment=16769]
RE: Daily Bench Shot - Redman - 02-20-2019
(02-20-2019, 07:16 PM)Stwood_ Wrote: Making some shelf pullouts. Was band sawing the front hand holds and....K-Pow!!!!!!!!
Thought I broke a blade. Nope.......
Put the blade back on, spun the wheel to align the blade before I tension-ed it and ...pow!!!
It d-tensioned again. I've got something going on with the upper wheel tensioner. Hafta to pull the wheel to even see in there.
Did you blow a bearing?
Looks like new brown helper is laying down on the job, old worthless helper getting it done.
RE: Daily Bench Shot - Gary G™ - 02-20-2019
This is what happened to my bandsaw too.
Haven’t had time to break it down and figure it out.
RE: Daily Bench Shot - Stwood_ - 02-21-2019
(02-20-2019, 07:56 PM)Gary G™ Wrote: This is what happened to my bandsaw too.
Haven’t had time to break it down and figure it out.
Yea. What brand?
MM16 here
Gluing up F and B's of pullouts. Then pin with dowels.
[attachment=16788]
RE: Daily Bench Shot - Gary G™ - 02-21-2019
Mine’s an older Laguna 16LT made in Italy green machine.
RE: Daily Bench Shot - Stwood_ - 02-21-2019
(02-21-2019, 05:21 PM)Gary G™ Wrote: Mine’s an older Laguna 16LT made in Italy green machine.
Probably the same co made both.
My lower wheel seems to have shifted inward. 1/4 blade is riding on the outside edge.
Blade is running middle of the wheel on upper. Nothing seems loose.
The brake pad on the inside part of the lower wheel is somewhat out of the wheel. Yea it has a brake that I don't use
RE: Daily Bench Shot - EdL - 02-24-2019
Putting some dominoes in a cabinet for a built in dishwasher.
Yea, I know, built in dishwashers don't need cabinets, except when they are replacing a stand-alone unit thats on the opposite side of the kitchen from the sink.
Ed
RE: Daily Bench Shot - Stwood_ - 02-25-2019
Finishing up the pantry pullouts.
[attachment=16884]