+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Yet another belt sharpener... (/showthread.php?tid=6889014)
RE: Yet another belt sharpener... - CLETUS - 11-24-2016
Bump for cputnam
RE: Yet another belt sharpener... - cputnam - 11-24-2016
In case anyone is wondering why this got bumped, it's because I stirred up Jack who suggested I stir up Cletus. I'm going to try build one out of my useless Delta 23-700 wet wheel grinder
RE: Yet another belt sharpener... - CLETUS - 11-24-2016
Let us know what questions you have! I enjoy using some redneck engineering to solve problems!
RE: Yet another belt sharpener... - EricU - 11-25-2016
did this get bumped through magic or something?
RE: Yet another belt sharpener... - cputnam - 11-27-2016
In case anyone is wondering why this thread resurrected, it's because I pinged Jack who suggested I ping Cletus who then did the deed and here we are. I'm going to take a whack at converting a worthless Delta 20-700 wet grinding wheel (with lumpy wheel) to something like this. I have no mechanical talent and will need all the help I can get.
RE: Yet another belt sharpener... - CLETUS - 11-28-2016
Here is the parts diagram for the 23-700... I guess if you're committed to sacrificing it, I'd start tearing it down. I'd leave the motor mounted to the switch for now anyway. We can figure out how to mount a drive wheel to the motor drive shaft.
http://www.ereplacementparts.com/delta-23700-type-grinder-parts-c-3275_3621_3654.html
RE: Yet another belt sharpener... - cputnam - 11-29-2016
Thanks. Parts diagram saved in Evernote,
RE: Yet another belt sharpener... - cbygeorge - 11-29-2016
Thanks for bringing this back to life. i missed it the first time around and may want to give it a try.
Chuck