+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: How to polish a saw plate (/showthread.php?tid=6366663)
Re: How to polish a saw plate - ZachDillinger - 05-17-2013
Steve Friedman said:
Used autosol and aluminum foil on a rusty pitted axe blade last night. Only gave it a couple of minutes on each side and it sure took off a ton of nasty brown stuff. It'll never get shiny, but thought this might be a good solution for cleaning grimy rusty tools. May have been more effective if I washed the grime off with Simple Green before using the foil.
By the way, we need a name for the technique of using metal polish with aluminum foil. I'm not creative enough. Foilishing? Pfoiling?
Steve
Well, we have "Scary Sharp", so why not "Blindingly Bright"?
Re: How to polish a saw plate - TobyC - 05-17-2013
Castillo Polishing Method
CP Meth......(maybe not)
Castillo Process
CasPro
Christian Clean
Toby
Re: How to polish a saw plate - Oldtoolalf - 05-17-2013
Steve Friedman said:
[blockquote]Blacky's Boy said:
AlFPol
milewink
Wouldn't we need Alf's permission for that?
[/blockquote]
A small fee for every usage would work for me.
No? Pah. Foiled again.
Cheers, Alf
Re: How to polish a saw plate - Gregory of Sherwood Forest - 05-17-2013
Oldtoolalf said:
No? Pah. Foiled again.:biggrin:
Cheers, Alf
And there you have your name! It's simple and memorable.
FOILED.
.
Re: How to polish a saw plate - TobyC - 05-17-2013
Gregory of Sherwood Forest said:
[blockquote]Oldtoolalf said:
No? Pah. Foiled again.:biggrin:
Cheers, Alf
And there you have your name! It's simple and memorable.
FOILED.
.
[/blockquote]
I like it!....Done!
Toby
Re: How to polish a saw plate - Blacky's Boy - 05-17-2013
TobyC said:
[blockquote]Gregory of Sherwood Forest said:
[blockquote]Oldtoolalf said:
No? Pah. Foiled again.:biggrin:
Cheers, Alf
And there you have your name! It's simple and memorable.
FOILED.
.
[/blockquote]
I like it!....Done!
Toby
[/blockquote]
Yeah, me too!!!
Re: How to polish a saw plate - Todd O. Cronkhite - 05-17-2013
TobyC said:
[blockquote]Gregory of Sherwood Forest said:
[blockquote]Oldtoolalf said:
No? Pah. Foiled again.:biggrin:
Cheers, Alf
And there you have your name! It's simple and memorable.
FOILED.
.
[/blockquote]
I like it!....Done!
Toby
[/blockquote]
Years ago when I watched the baseball movie "The Natural" starring Robert Redford, Redfors told his batbgoy to go get a particular bat--becauuse it had been "boned". I didn't know what that phrase meant at the time, but I have since learned that it meant that somebody had rubbed the bat with a bone to compress the fibers---thus making it harder---thus resulting it a better hit.
So, "Foiled" seems to fit.
"This saw has been "Foiled"
This saw was it bad shaped. But after a good "Foiling" just looked at it now.
Honey, I'm going to spend the night in the shop "Foiling".
I foiled this saw years ago and it tarnished up again, so I did it again, Yes, this saw has been "Foiled Again".
Re: How to polish a saw plate - Timberwolf - 05-17-2013
"If your saw doesn't shine.....FOIL it"!! That has a nice ring to it!!!!!!! I'm IN!!!!!
Re: How to polish a saw plate - Gregory of Sherwood Forest - 05-17-2013
Hey Jack, you'll recognize this reference:
"FIRE FOR EFFECT!"
now you can use,
"FOILED FOR EFFECT!"
.
Re: How to polish a saw plate - Timberwolf - 05-17-2013
I love it, Greg!!!!!!!!!
