+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Daily Bench Shot (/showthread.php?tid=7336585)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
RE: Daily Bench Shot - R Clark - 12-27-2020
Anticipating our first big dump of snow on Tuesday. Had to push some odds and ends out of the way to make room for the snow handling equipment; that stuff normally sits in the unheated machine shed until needed.
Loaded 140 pounds of sand on the back of the ATV for ballast.
[attachment=31863]
I ain't skeered...
RE: Daily Bench Shot - thewalnutguy - 12-29-2020
(01-19-2018, 07:10 PM)Stwood_ Wrote: Post away. Give me a picture of what's on your workbench today.
Daily, weekly, whatever. Come on, what is laying there you are working on, or need to put up that's in the way.
Here's mine today. Not much going on, just a table to repair the leg on.
starting the build of another pair of nightstands, based on the Greene and Greene table featured a few years ago in Woodsmith Magazine. The pieces pictured here now have two coats of BLO/turpentine, will get four or five coats of garnet shellac before assembly. Legs will get tapered cut only when all trial assembly/fitting have been done, as they're much easier to clamp without requiring tapered shims, and will get tapered and finished just prior to final assembly. Quite a few more pieces to get cut and finished as well.
RE: Daily Bench Shot - Stwood_ - 01-01-2021
No wood projects on the bench today. Hasn't been for a while. Too many other ToDo projects.
New gearbox for the bushhog mower.
A chainsaw down for repair.
[attachment=31989]
RE: Daily Bench Shot - 2beast - 01-01-2021
I have been using my scaffolding for years as a clamp rack in my shop.
Now I have a real use for it so out it goes.
It is not coming back....
Looks like time for a clamp rack
[attachment=31990]
RE: Daily Bench Shot - Stwood_ - 01-02-2021
(01-01-2021, 04:51 PM)2beast Wrote: I have been using my scaffolding for years as a clamp rack in my shop.
Now I have a real use for it so out it goes.
It is not coming back....
Looks like time for a clamp rack
Yea, I'd say so.
My clamps are either on wall racks, on the sides of benches just under the edge of the top, or laying on a shelf under a roll around cart.
RE: Daily Bench Shot - Belle City Woodworking - 01-03-2021
The Bench build continues.....
![[Image: IMG-0204.jpg]](https://i.postimg.cc/J0RWqpgb/IMG-0204.jpg)
The clamps are on there so I could see how they would come together in the glue up. I am going to glue these up in sections of 4 so I can run them trough the jointer after glue up. You are looking at the bottom side of the bench. The bench will be 7' in length and have a LN 24" twin screw face vise and a LN Sliding tail vise.
This is not an easy project for a guy with two replaced shoulders
RE: Daily Bench Shot - Stwood_ - 01-03-2021
Looks heavy already........
RE: Daily Bench Shot - Belle City Woodworking - 01-04-2021
(01-03-2021, 07:30 AM)Belle City Woodworking Wrote: The Bench build continues.....
The clamps are on there so I could see how they would come together in the glue up. I am going to glue these up in sections of 4 so I can run them trough the jointer after glue up. You are looking at the bottom side of the bench. The bench will be 7' in length and have a LN 24" twin screw face vise and a LN Sliding tail vise.
This is not an easy project for a guy with two replaced shoulders
(01-03-2021, 12:57 PM)Stwood_ Wrote: Looks heavy already........
It is going to be brutally heavy when it is done!
John
RE: Daily Bench Shot - R Clark - 01-05-2021
(01-04-2021, 10:35 AM)Belle City Woodworking Wrote: It is going to be brutally heavy when it is done!
John
My back hurts looking at it!
As for me, I'm starting the nightstand build to go with the recently-completed dresser. Another one of those "We want something that looks like this" specs with accompanying internet pic. Passed over text on a cell phone.
The 1.5" square stock is for the corner posts of the frame. Hardwood supplier only had poplar in 4/4, so I had to glue up the posts. The nightstands will be mostly painted pieces, so poplar was the best choice. I'm in the middle of morticing the posts. Going slow since I usually screw things up when I get in a hurry.
[attachment=32098]
RE: Daily Bench Shot - Stwood_ - 01-08-2021
[attachment=32148]