+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: "The shower stall looks dingy" according to LOML (/showthread.php?tid=7252129)
Pages:
1
2
Re: "The shower stall looks dingy" according to LOML - Estrogen Hostage - 03-26-2016
I would try buffing it first. Works great on the boat.
Re: "The shower stall looks dingy" according to LOML - srv52761 - 03-26-2016
Be careful... Be very careful, this is the classic "honeydo" sliding slope.
My wife's was even more innocuous.
Wife: Well, I suppose I should mop the kitchen floor.
But, it never looks clean. I suppose I should strip the old wax off that vinyl flooring. Can you help me move the refrigerator?
(move, slide, move)
Oh, look, it was really bad under the frig. And look how the wall paper is peeling. (pulls edge of tiny piece of peeling paper... rrrripppp)
You know, I was tired of that paper anyway. I think it would look better painted.
What will it take to get the paper off and the walls ready to paint.
You know, the cabinets would be the wrong color with the new paint. Wouldn't it be easier to paint them if we removed the cabinets?
Before we paint, how hard would it be to put a couple more outlets in?
As long as the cabinets are out it would be a good time to replace the flooring.
Me: Ah, yeah, do we still have to mop it, then?
Re: "The shower stall looks dingy" according to LOML - JosephP - 03-26-2016
Did you at least get to keep your old appliances?
Re: "The shower stall looks dingy" according to LOML - JosephP - 03-26-2016
OP: Would bleach work? Maybe a lot of Simple Green and a little elbow grease? (not mixed with bleach - I'd presume that is a bad idea).
Re: "The shower stall looks dingy" according to LOML - blackhat - 03-26-2016
You might be pleasantly surprised what a thorough clean and then a coat of tub polish can do.
Re: "The shower stall looks dingy" according to LOML - Wild Turkey - 03-26-2016
Yep, vinegar and scotchbrite is my first option, with some bleach applied to the other side for a comparison.
Buffing, wet-sanding and repainting is definitely not on my list of preferred options.
Re: "The shower stall looks dingy" according to LOML - blackhat - 03-26-2016
Nope. Check for a bottle of Gel Gloss or similar. Like a car polish for acrylic coated fibreglass.
Re: "The shower stall looks dingy" according to LOML - Wild Turkey - 03-26-2016
Lowes and HD both have it.
Sounds like what I need.
I'll try a bottle.
Re: "The shower stall looks dingy" according to LOML - Turner52 - 03-27-2016
Go to a professional cleaning supplies sales outlet. Buy TANGO. It is a paste grafitti remover. Will make it look brand new. Have used it myself on a varity of surfaces including fiberglass shower units. Very pleased with the results.
Re: "The shower stall looks dingy" according to LOML - Snipe Hunter - 03-27-2016
It's gel-coat so I wouldn't use any abrasive rougher than maybe 2500 or 3000 grit. If you can get your hands on a buffer, you could use Trizact 3000 grit on your ROS as long as you have the velcro backer. I know it's 6" but I use it on a 5" disc all the time. Make sure you use a spray bottle with water to keep everything wet. I add a couple drops of Dish soap per quart to aid lubrication and to help prevent the abrasive from clogging. You can probably do the whole unit with one pad. These are loaded with diamond dust, you won't dull it but you can clog it up if you don't keep it wet.
Then buff it with a good compound. You can also get a small velcro backed buffing pad for your ROS. If you need compound, I can send you some.
Hopefully you have a 90 degree ROS/DA sander but a palm sander (can't stand those thing) should work too, it will just take longer.
This is how you make an old boat look new.