+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Workshop flooring (/showthread.php?tid=7326944)
RE: Workshop flooring - frigator - 01-14-2017
If it were me I would pay a little more and install sanded plywood on top of sleepers. I've had two of these floors in my previous shops and they were great to work on. Can also run any electrical underneath and have plugs right at your machines. I would not put any finish on it as I put poly on my first floor and it was a little slick with sawdust.
I haven't put the floor down in my new shop as I can no longer get down on my knees. So I'm going to have to hire someone like you.
RE: Workshop flooring - fredhargis - 01-14-2017
With the effort of getting everything gathered, and doing the installation, I would guess he'll have a full day (or more) doing it. That doesn't make the price sound too bad.
RE: Workshop flooring - Cecil - 01-14-2017
(01-13-2017, 08:47 PM)DaveParkis Wrote: I have a concrete floor and I use the interlocking tiles like those sold at HF. This has worked out very well for me. Easy to clean, I can change it easily if I want to, and it's relatively inexpensive. The cushiness is also helpful for my knees/back and when a tool gets dropped.
Which interlocking tiles? Thanks
RE: Workshop flooring - Tapper - 01-14-2017
(01-13-2017, 09:14 PM)MikeBob Wrote: In mine a basement and some in the garage, both on concrete, I have the HF floor pads in front of my machinery and work benches, works great, and way cheaper then what you are thinking about. Also I have a stool on wheels that has a height adjustable seat that I use a lot at the bench.
(01-13-2017, 09:38 PM)JGrout Wrote: On a different note I would never put a plastic laminate floor down in a shop
that stuff is dangerous with debris on it
JME
Maybe we can get a comment on this from Cian, who is a regular here and has had his laminate installed for at least a couple of years. I'll PM him. Any others who've installed laminate who care to comment?
Doug
RE: Workshop flooring - MikeBob - 01-14-2017
(01-14-2017, 06:03 PM),Tapper Wrote: Maybe we can get a comment on this from Cian, who is a regular here and has had his laminate installed for at least a couple of years. I'll PM him. Any others who've installed laminate who care to comment?
Doug
My nephews has a concrete basement floor with an epoxy smooth finish on it, he is a turner, with chips and fines on it it is very slippery.
Mom has a Prego laminate floor in her kitchen, slipperier then snot when wet.
RE: Workshop flooring - bob-t - 01-14-2017
Ditto on the horse mats, I have a 16 x 20 shop and installed these around the stationary tools. It would have been too much work to move heavy tools and work bench to put it on entire floor. Has worked well for over 10 years. They are similar to these.
http://www.tractorsupply.com/tsc/product/rubber-mat-black-4-ft-x-6-ft
Bob
RE: Workshop flooring - Cian - 01-14-2017
This comes up once a year or so. I have laminate flooring in my basement woodshop. Going on 7 years now. I wanted a floor that didn't decrease the ceiling height. I did the water test over the course of several months prior and had no sign of moisture seeping through the concrete (modern house with drain tiles and a sump pit). I placed 6mil poly sheathing beneath a foam padded vapor barrier underlayment - belt and suspenders. Admittedly, I did find the floor slippery at first, but had discovered a very fine layer of dust on the boards from the factory. Maybe a manufacturing by-product of the aluminum oxide surface treatment? Anyway, a thorough sweeping took care of that issue, and I have not found the floor to be slippery since. The floor looks and feels great - major oohs and ahhs from anyone that visits and not one has complained about slipping. Actually, I wear rubber soled shoes while in the shop and can make my shoes squeak as in a gym floor. However, I am not one to let sawdust accumulate and I do have a decent dust collection setup. I'd do it again without hesitation. YMMV.
![[Image: 20100105_Floor_e_zpsa9ycg4zu.jpg]](http://i1178.photobucket.com/albums/x366/CianPerez/20100105_Floor_e_zpsa9ycg4zu.jpg)
![[Image: 20120301_125625_zpsewdthcox.jpg]](http://i1178.photobucket.com/albums/x366/CianPerez/20120301_125625_zpsewdthcox.jpg)
RE: Workshop flooring - DaveParkis - 01-14-2017
(01-14-2017, 11:53 AM)Cecil Wrote: Which interlocking tiles? Thanks
I can't find the HF ones, but these are pretty much the same thing. http://www.sears.com/norsk-2-ft-x-2-ft-6-pack/p-00962361000P?sid=IDx01192011x000001&gclid=CjwKEAiAtefDBRDTnbDnvM735xISJABlvGOv_d_Z2hw9CDVCZXvVWMDsMozmARQsEWX-UfAcUzr1qhoCfvHw_wcB&gclsrc=aw.ds
RE: Workshop flooring - Robert Adams - 01-14-2017
Costco also has them from time to time. When I was in ours a couple weeks ago they had rhetoric 6 pack for around $11.
Only problems with them is that you can't roll machines over it and vacuuming takes a special technique.
RE: Workshop flooring - JGrout - 01-14-2017
(01-14-2017, 06:03 PM)Tapper Wrote: Maybe we can get a comment on this from Cian, who is a regular here and has had his laminate installed for at least a couple of years. I'll PM him. Any others who've installed laminate who care to comment?
Doug
It is just like I have no experience, a regular rookie with just an opinion
Tell you what why don't you put it down in your shop if you even have one and get back with us
then we shall have it from the oracle hissself
HAND