+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: LED for Bandsaw (/showthread.php?tid=7330296)
Pages:
1
2
RE: LED for Bandsaw - Guest - 05-23-2017
I use the Jansjo flex light on my Delta Band saw. Removed the round base, and bolted to a small bracket, bolted to the bs frame.
I mounted a duplex handy box, on the frame of the saw to the left of the table. An on/off switch for the saw, and the power supply for the light, on a switch.
Light isn't super bright, but with gooseneck, putting light 4" from work works great.
RE: LED for Bandsaw - AZ Engineer - 06-09-2017
Here is a flex LED on mag base.
https://www.amazon.com/Intensity-Lumens-Flexible-Adjustable-Magnetic/dp/B01A51TMSO/ref=cm_cr_arp_d_product_top?ie=UTF8
RE: LED for Bandsaw - Aram - 06-09-2017
I bought this one from Lee Valley. It lives on my bandsaw.
http://www.leevalley.com/us/wood/page.aspx?cat=1,70596,43349,71189&p=71189
Strong light, zoomable, two ways to mount with magnets. It's a good idea to take the battery out and clean the leads in the light every now and then, but that's probably the nature of sawdust.
RE: LED for Bandsaw - Rob Young - 06-10-2017
(06-09-2017, 10:12 PM)Aram Wrote: I bought this one from Lee Valley. It lives on my bandsaw.
http://www.leevalley.com/us/wood/page.aspx?cat=1,70596,43349,71189&p=71189
Strong light, zoomable, two ways to mount with magnets. It's a good idea to take the battery out and clean the leads in the light every now and then, but that's probably the nature of sawdust.
+1 works great.
RE: LED for Bandsaw - daddo - 06-10-2017
Here ya go.
![[Image: enpieza_lamp.jpg]](http://cdn.freshome.com/wp-content/uploads/2008/10/enpieza_lamp.jpg)
![[Image: dead-duck-lamp-1.jpg]](http://cdn.freshome.com/wp-content/uploads/2008/10/dead-duck-lamp-1.jpg)
You can use an LED type bulb.
RE: LED for Bandsaw - Steve N - 06-11-2017
Gotta love that Goose
RE: LED for Bandsaw - Chuck 80 - 06-16-2017
????
- Up to 60,000 hour of use; 28 LED bulbs
- 25-inch neck; 99% energy efficient
- One year limited warranty