+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: New "scroll ready" Blue Spruce saw (/showthread.php?tid=7333407)
Pages:
1
2
RE: New "scroll ready" Blue Spruce saw - Mike Brady - 10-10-2017
(10-09-2017, 01:53 PM)C. in Indy Wrote: Aww, heck, I couldn't wait to learn any more about the Blue Spruce model. But I did decide to spring for a Knew Concepts fretsaw, finally. I now have it and I am impressed, but at the same time I note that it doesn't save me from needing to practice my technique frequently. After several varying waste-cuts, I was starting to pull out some trapezoids needing very little trimming. Cool stuff!
Chris
A couple of things I noted:
1. The Blue Spruce (I hate to call it the BS) saw is built as a coping saw but will have available adapters for fret saw blades. When you use a thin-kerf back saw, the coping saw blades are a no-go for waste removal.
2. Blades make a big difference in frame saw performance. The one that Knew Concepts recommends for their fret saws is a good one.
RE: New "scroll ready" Blue Spruce saw - Dan Moening - 10-11-2017
Quote:When you use a thin-kerf back saw, the coping saw blades are a no-go for waste removal.
Only if you absolutely, positively must place the blade into the backsaw kerf.
RE: New "scroll ready" Blue Spruce saw - Admiral - 10-11-2017
(10-11-2017, 04:54 PM)Dan Moening Wrote: Only if you absolutely, positively must place the blade into the backsaw kerf.
Frankly, I never do.
RE: New "scroll ready" Blue Spruce saw - Mike Brady - 10-12-2017
(10-11-2017, 05:02 PM)Admiral Wrote: Frankly, I never do.
Then, since you both like to do that much extra sawing, you'll love using this saw!
RE: New "scroll ready" Blue Spruce saw - bandit571 - 10-12-2017
I guess I'll just stick to my Disston-Porter No. 10...
.....since I don't cut the waste out with a saw... 
RE: New "scroll ready" Blue Spruce saw - bandsaw - 10-12-2017
I'm assuming there's a linkage inside the saw frame that turns the blade holder at the other end - kinda like an old arm type drafting machine.
Very Clever!
RE: New "scroll ready" Blue Spruce saw - Mike Brady - 10-13-2017
Is there any hint of a price for this saw? It might just be me turning into an old tight-wad, but some prices of premium tools can take the breath away. The term "premium" might not be have to yield to "luxury".
RE: New "scroll ready" Blue Spruce saw - Strokes77 - 10-13-2017
(10-13-2017, 09:45 AM)Mike Brady Wrote: Is there any hint of a price for this saw? It might just be me turning into an old tight-wad, but some prices of premium tools can take the breath away. The term "premium" might not be have to yield to "luxury".
It's liable to cost more than my bandsaw... for real...
But I guess that's no big deal... my Jointer plane cost more than my powered jointer....
RE: New "scroll ready" Blue Spruce saw - ez-duzit - 10-14-2017
(10-12-2017, 02:53 PM)bandsaw Wrote: I'm assuming there's a linkage inside the saw frame that turns the blade holder at the other end - kinda like an old arm type drafting machine.
Very Clever!
Not possible. Not necessary.