![]() |
Workbench Build - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Workbench Build (/showthread.php?tid=7333930) |
RE: Workbench Build - mound - 10-13-2017 (10-13-2017, 03:11 PM)Large Wooden Badger Wrote: post away - I'd love to see it. ok ![]() ps. let it be a bench.. use and abuse it! RE: Workbench Build - Large Wooden Badger - 10-13-2017 Very Nice! I love the brand/insignia RE: Workbench Build - Mark A Smith - 10-13-2017 (10-12-2017, 02:39 PM)Large Wooden Badger Wrote: I recently completed my workbench build. I'm curious what y'all recommend in terms of some kind of finish? I used what Lie-Nielsen uses on their benches: 1 part BLO, 1 part Spar Varnish, 1 part mineral spirits. Works fine and is easily renewable. RE: Workbench Build - BrokenOlMarine - 10-17-2017 I could use a second bench in the new shop. Looks like y'all used the same set of plans. Mind if I ask where you got em? RE: Workbench Build - Large Wooden Badger - 10-17-2017 (10-17-2017, 02:25 PM)BrokenOlMarine Wrote: I could use a second bench in the new shop. Looks like y'all used the same set of plans. Mind if I ask where you got em? I got the plans from Benchcrafted, the same place I ordered the vise hardware from. Cory RE: Workbench Build - mound - 10-17-2017 (10-17-2017, 02:34 PM)Large Wooden Badger Wrote: I got the plans from Benchcrafted, the same place I ordered the vise hardware from. ditto! Link RE: Workbench Build - messmaker - 10-20-2017 (10-17-2017, 03:24 PM)mound Wrote: ditto! It is a beauty. RE: Workbench Build - BrokenOlMarine - 10-20-2017 (10-17-2017, 03:24 PM)mound Wrote: ditto! Thanks to you both, I have marked the link and saved it. I may make that a spring project, or one for next summer. ![]() Depends on my health over the next few months. ![]() RE: Workbench Build - Tony (Charleston WV) - 10-21-2017 You forgot to put a bank of drawers in the big hole in the middle. Good for tools, and if configured correctly, candy bars (if someone in your house is nagging you about that sweet tooth). ![]() Seriously--that's a fabulous bench. I love the dovetails--did you stand on a ladder to do those, or are you 8 1/2 feet tall? ![]() ![]() RE: Workbench Build - titanxt - 10-24-2017 That is a beautiful bench!!! |