+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Plywood or MDF (/showthread.php?tid=7337145)
Pages:
1
2
RE: Plywood or MDF - Cooler - 02-08-2018
I used melamine laminate over particle board. Cheap and readily available. You can write on the board and mark start/stop locations and then wipe clean. The material being worked slides easily over the melamine.
Cheap enough to replace if I even need to.
RE: Plywood or MDF - pebbles - 02-08-2018
Thanks so much for the information. I plan on using high pressure laminate to laminate on the top and ege with hardwood. Probably use ply for the fence. I was planning to use Norm's router table.
RE: Plywood or MDF - MichaelMouse - 02-08-2018
(02-08-2018, 09:07 AM)pebbles Wrote: Thanks so much for the information. I plan on using high pressure laminate to laminate on the top and ege with hardwood. Probably use ply for the fence. I was planning to use Norm's router table.
MDO for mine. Shellacked the paper facings to make them slick and durable.
RE: Plywood or MDF - SteveS - 02-09-2018
I'd never use MDF. I have 1-1/4" MDO for mine. Much stiffer than MDF, even doubled.