+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Start of something small (/showthread.php?tid=7339894)
Pages:
1
2
RE: Start of something small - bandit571 - 06-04-2018
The joys of being Retired.....I work only as much as i feel like, when I feel like it....
So....maybe a PIP, since I now have a coat of Poly Gloss on this little table?
[attachment=10808]
Center view..not sure which way will be the "front"
[attachment=10809]
Maybe this one?
[attachment=10810]
Or this one?
Just one coat, so far
RE: Start of something small - bandit571 - 06-07-2018
One coat was just enough. Table is done. Other than rehabbing a couple chisels from recent rust hunts, not much going on. Out of lumber, at the moment
Well, there are three 2 x 10 x 24" slabs sitting around, and a 1/2" x 2' x 2' maple plywood panel...not really enough to do much of anything with....yet.
Chisels being rehabbed?
[attachment=10859]
Defiance by Stanley. 1-1/2" wide. Needed a new handle.
And last night's foray..
[attachment=10860]
Needed a new edge done. Old one was skewed, and at a 40+ angle for a bevel
[attachment=10861]
Crescent Tool Co. No. 175 1 1/4 Made in Jamestown N.Y., USA
More for Plumbers and Electricians..
[attachment=10862]
I even repainted the red end, after removing the old Mushroomed part
[attachment=10863]
Was part of a large tub of tools I picked for $5...Chisel is setting bevel down in that photo, shadows showing up.
Waiting on either a new stash of Lumber, or the next Rust Hunt trophy....
RE: Start of something small - Arlin Eastman - 06-08-2018
What wood was it for the table top? Also another project well done buddy.
RE: Start of something small - bandit571 - 06-08-2018
Table's top was just Pine from Menard's.....they had a pallet of what they called "Quality Boards" that had been cut to 4' lengths, I picked through and found an interesting one, that didn't have a bunch of knots. Just a 1 x 10 x 48"....Made a pair of 1 x 10 x 24" pieces, and bookmatched them....
RE: Start of something small - Cian - 06-11-2018
(06-07-2018, 10:57 AM)bandit571 Wrote: One coat was just enough. Table is done. Other than rehabbing a couple chisels from recent rust hunts, not much going on. Out of lumber, at the moment...
Very nice. I do enjoy seeing your project posts. Thanks for sharing.
RE: Start of something small - Skip J. - 06-11-2018
(06-11-2018, 11:15 AM)Cian Wrote: Very nice. I do enjoy seeing your project posts. Thanks for sharing.
Yes... excellent work.. Thanks!