+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: What to do with... (/showthread.php?tid=7340194)
Pages:
1
2
RE: What to do with... - bandit571 - 06-14-2018
Plant Stand.
Got the bevels all done, today..
[attachment=10986]
Used a few planes to make the bevels...
[attachment=10987]
Stanley #4c ( Made in England) a Millers Falls #14 jack plane, and a Shelton low angle block plane.
Got the tenons done, after finding out long long to make the aprons, including the tenons..
[attachment=10988]
Chopped a few mortises..
[attachment=10989]
The "foot" on the end of the legs wound up having to be hung over the side of the bench. Managed to get three mortises chopped, and a test fit..
[attachment=10990]
And was starting to lay out the next mortise,, legs started cramping up...my legs, that is..
..swept the shop, and called it a day 
Maybe tomorrow, I can get the rest of the mortises chopped?
Stay tuned..
RE: What to do with... - Arlin Eastman - 06-15-2018
That sure is going to be a fancy one. Looking great.
RE: What to do with... - bandit571 - 06-18-2018
Saturday was Rust Hunt day, Sunday was a cookout.
Not much got done, woodworking... 
May open the shop up tomorrow, as the shop is closed on Mondays....we'll see.
Need to get this project done, because I was informed a 8yr old GrandBRAT needs a smallish 3 drawer chest of drawers,,,,so he won't just toss the clothes all over the floor,
Not sure what the wood for it will be, yet....
Stay tuned..
RE: What to do with... - bandit571 - 06-18-2018
Well, I did go to the shop...I was just going to clean up that backsaw I picked over the weekend...really, I was...got to looking at that plant stand project...one thing led to another
Chopped the remaining mortises....then spread some glue....trying to get more on the parts, than on me...clamped the thing up
[attachment=11059]
Checked the diagonals for square...had to add a fifth clamp
[attachment=11060]
To pull things into square....then dug out a couple blocks..
[attachment=11061]
That I'll trim to size and notch....and maybe some pilot holes for screws...
About that saw?
[attachment=11062]
It does a decent job of cutting....seemed a bit short for my Stanley #2246 Mitre box. Hmmm, measure this thing again....4"x 22"? Might have a box for this saw..
[attachment=11063]
If I don't decide to keep it as a carcass saw...
Stay tuned..
RE: What to do with... - iclark - 06-19-2018
Just piling on to say that I am enjoying the build. Not bored by it at all/
Thank you. It is looking good.
RE: What to do with... - bandit571 - 06-19-2018
Well, how about a PIP, then....
Got the stand out of the clamps today. Added the blocking, and some dowels.....sanded things, ran the router around the top's edge....the haul it upstairs for the Boss' approval..
[attachment=11091]
Top details...
[attachment=11092]
Screws stand out, because this will get painted, and sat on the porch..
[attachment=11093]
Leg details....longer dowels are 1/2", short ones are 1/4" ( ran out of the 1/2" stuff)
[attachment=11094]
This stand is all that big....top is 9" wide, by 17" long...stands just under 21" tall.
[attachment=11095]
This is the size of the planter it will be holding.
Waiting on a colour choice from the Boss, as to what colour paint she wants.
Other than that, Project is done...thanks for looking in..
RE: What to do with... - bandit571 - 06-20-2018
And that may be it for a while....medical reasons say I need to avoid sharp objects. Doing a trial of a blood thinner for a few weeks...then maybe a little work on the heart. They are trying to reduce the chance of blood clots causing a stroke. Maybe after I get the "go ahead" again....I may be doing that 3 drawer "Chester Drawers"....
Stay tuned.....will update as things go along...
RE: What to do with... - Arlin Eastman - 06-20-2018
Looks great Bandit
What is the next project going to be?
RE: What to do with... - hbmcc - 06-20-2018
I like those feet! And, a nice save of the slab top. Great project!
Re, blood thinners: Don't blow your nose. Grass pollen has turned me into a sprinkler and a lot of that snot turns into beet juice. And, don't touch anything but feathers or the bruises make you look ab-used.
Ps. Have to make light of life's little irritations. I've laughed with costumers where I volunteer, and see their last take-home return a couple weeks later. Humor always helps.....