+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: I built my first back saw. (/showthread.php?tid=7347767)
RE: I built my first back saw. - AHill - 04-18-2019
Great job!
Tell us more about the plate and the handle. Did you buy a plate with the teeth already punched or did you file the teeth yourself? Did you use a template? Where did you get the template for the handle? What would you do differently the next time? What was your most challenging part? Inquiring minds want to know!
RE: I built my first back saw. - Elijah A. - 04-18-2019
I really wanted the bad axe bayonet but I couldn't afford it so I sort of modeled it after that. I wanted a precision carcass saw 14" long. I wanted a little more taper than the bad axe had so i went 2" at the toe and 2 1/4" at the heel. I cut the teeth, first time I've done that. I filed it for rip 14 ppi but I would like to alter the geometry to more of a hybrid all around user. I'm definitely not great at sharpening but the saw does seem to cut rip cuts very well right now. I used 0.018 shim stock. I really like the feel of it so far! I used a template from Blackburn Tool Works for the handle and the teeth. I'm excited to learn more about sharpening! I have a good feeling this will be my main user, at least until the next one I build
RE: I built my first back saw. - Aram - 04-18-2019
(04-18-2019, 08:59 AM)Elijah A. Wrote: Hey y'all,
So I bought some raw materials and I had a scrap piece of maple and built a back saw. I've never done anything like this before and I am relatively new to hand tools. This was a fun project! It's not a bad axe or a Lie Nielsen, it has blemishes, makers marks (mistakes
Eli
That looks great! Impressive, especially for a first try.
RE: I built my first back saw. - Stwood_ - 04-18-2019
Looks great!! I've got materials here from ??? punched saw plates, and bent brass backs from Dom.
All I lack is saw nuts, and the time and inkling to make some saws.
RE: I built my first back saw. - stillgotten - 04-18-2019
Great looking saw.
RE: I built my first back saw. - Elijah A. - 04-19-2019
Thanks for the kind words!
RE: I built my first back saw. - Pedder - 04-20-2019
(04-18-2019, 04:57 PM)Elijah A. Wrote: I really wanted the bad axe bayonet but I couldn't afford it so I sort of modeled it after that.
This is pretty much where I started. In my case it was an Adria I couldn't afford.
Your saw is a very nice first attempt. The only nicer first attemp as Isaac's saw he showed her a few years ago.
You should revisit your upper horn. Looks like it comes back to much.
Be carfull saw making is highly addictive. It distracted me from real woodworking.
Cheers
Pedder
RE: I built my first back saw. - Bibliophile 13 - 04-20-2019
Very cool. I’ve made a couple myself, and yeah, lots of challenges but lots of fun, too.
So the big questions: how does it feel in your hand? And how does it cut?
RE: I built my first back saw. - Elijah A. - 04-20-2019
Feels fantastic in my hand! I'm still working on the sharpening. It cuts pretty well overall. I need to put some set on the teeth but I don't have a saw set. I'm checking into Paul Sellers method with a hammer and punch. Again, thank you all for the kind words. Inspires me to do it again!
RE: I built my first back saw. - MauleSkinner - 04-20-2019
Sweet!
If it works, it’s beauty.