+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Sliding Home (/showthread.php?tid=7349509)
Pages:
1
2
RE: Sliding Home - Stwood_ - 07-31-2019
(07-31-2019, 10:38 AM)WoodTinker Wrote: My thoughts would be to slide it in from the back and only glue the front a couple of inches. This would let the expansion and contraction be at the back. The grain direction is the same in the sides and panel, so you are probably fine.
Yes, that's what I was getting at. Those sides will expand/contract. Gluing front *and* back may/may not be a problem.
I would have glued front only also.
But, like you say, the grain direction is the same.
RE: Sliding Home - Woodenfish - 07-31-2019
Nice work Hank! Been there done that and it worked well for me too.
RE: Sliding Home - Scoony - 08-04-2019
Looking great. When I built mine years ago, the placement of the hinges for the lid was a tricky affair. It was trial and error and I ended up filling in screw holes until I got the right placement.
RE: Sliding Home - Hank Knight - 08-06-2019
(08-04-2019, 08:25 PM)Scoony Wrote: Looking great. When I built mine years ago, the placement of the hinges for the lid was a tricky affair. It was trial and error and I ended up filling in screw holes until I got the right placement.
Thanks for the heads-up Scoony. A friend sent me a diagram for the hinge placement. I hope it works!