+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Delta contractor table saw - Spartanburg, SC (/showthread.php?tid=7352206)
Pages:
1
2
RE: Delta contractor table saw - Spartanburg, SC - fredhargis - 01-12-2020
That looks like a 34-444 that I had, and it may have the motor that Delta rated at 1.5 HP for 120V, and 2 HP for 240V. In truth it's a 2 HP motor they derated at 120 to meet UL requirements. If that's the case you may still get what you want.
RE: Delta contractor table saw - Spartanburg, SC - gtrboy77 - 01-12-2020
It is indeed the 34-444. Here is a pic with the specs.
RE: Delta contractor table saw - Spartanburg, SC - gtrboy77 - 01-12-2020
Larger pic. I’ll try and get a pic of the motor plate.
RE: Delta contractor table saw - Spartanburg, SC - John Mihich - 01-13-2020
Looks exactly like my Craftsman 3 hp contractors saw.
RE: Delta contractor table saw - Spartanburg, SC - Scott W - 01-13-2020
Two suggestions...one already has been made.
1. Dedicated dado blade setup.
2. Don't laugh but part it out on Ebay. I have done it and have gotten for more then I could have sold an intact saw for. Fence, rails, stand, crank handles, cast iron top, motor, etc....plus you have a mobile base.
RE: Delta contractor table saw - Spartanburg, SC - gtrboy77 - 02-25-2020
Saw has been sold