![]() |
Quick Connect Dust Collection Input - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Quick Connect Dust Collection Input (/showthread.php?tid=7357124) Pages:
1
2
|
RE: Quick Connect Dust Collection Input - wjt - 08-13-2020 (08-12-2020, 09:55 PM)Tapper Wrote: Nobody picked up on that? Doug: It looks like a hole saw. I suspect he may be using something with carbide cutting edges for the Bakelite and the amount he is cutting out but that's just a guess. Bill RE: Quick Connect Dust Collection Input - kurt18947 - 08-13-2020 (08-10-2020, 01:38 PM)T.J. Wrote: Hey, folks. Hope everyone is staying safe in your shops and wearing your masks (against dust and other baddies).I'm uber cheap ![]() RE: Quick Connect Dust Collection Input - hairy - 08-15-2020 (08-10-2020, 01:38 PM)T.J. Wrote: What say you? Do you have the Rockler setup? If not, what do you use instead? I have the older version of the Rockler setup. Since buying I have started using green 4" PVC sewer pipe. I like it better. Sometimes the Dust Rite is a little too tight, hard getting it on and off. That doesn't happen with the PVC. I use the universal hose clamp - duct tape. RE: Quick Connect Dust Collection Input - MstrCarpenter - 08-17-2020 A contractor I work a lot with does concrete cutting, grinding, and polishing. He has serious vacuums that collect concrete dust from 25" and 36" dia. floor grinders. They all use cam-lock fittings. They're pretty much indestructible, and seal well (well enough for high water pressure if needed). They lock together easily depending on the gasket thickness and stay together 'till you release the cams. Available in standard sizes with several mounting options (i.e. hose barb, threaded, in male or female); they are standardized so for the most part they fit across various manufacturers. There are matching plugs available too. Prices vary widely but I haven't seen much difference in performance even comparing poly. to aluminum. https://www.amazon.com/s?k=4+camlock+fittings&i=industrial&crid=L743N7816L3J&sprefix=4%22+camlo%2Cindustrial%2C154&ref=nb_sb_ss_ts-o-p_1_7 |