+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Should I get rid of my old Bosch router? (/showthread.php?tid=7361831)
Pages:
1
2
RE: Should I get rid of my old Bosch router? - Bill Wilson - 03-28-2021
You’ve been given several good reasons to keep the Bosch. I’ll just add that I’m also just a hobbiest and i’ve got seven routers, five of which I use regularly. I don’t think keeping the Bosch qualifies as hoarding. Having multiple routers is pretty common with woodworkers.
RE: Should I get rid of my old Bosch router? - Arlin Eastman - 03-28-2021
(03-27-2021, 10:52 AM)overland Wrote: The Bosch does have a plunge base. There's both: a fixed base and a plunge base.
Then keep it and fix whatever may go wrong with it in the future. I love mine i got from a guy here cheap since he knew me/us
RE: Should I get rid of my old Bosch router? - Cabinet Monkey - 03-29-2021
If you’re not using it and not a collector, why not sell it ?
That said a small battery powered router isn’t going to make cabinet doors , raised panels , or big mortises. You can’t run 1/2” shank bits in it either. But again, if you don’t need this capability; the potential goes unused. Use the capital for something that will.
RE: Should I get rid of my old Bosch router? - kurt18947 - 03-29-2021
(03-28-2021, 01:20 PM)Bill Wilson Wrote: You’ve been given several good reasons to keep the Bosch. I’ll just add that I’m also just a hobbiest and i’ve got seven routers, five of which I use regularly. I don’t think keeping the Bosch qualifies as hoarding. Having multiple routers is pretty common with woodworkers.
1 2.5 h.p. combo 1 3+ h.p table mounted router. I bought the Grizzly 2 base trim router on a whim (it was on sale y'know
) and have used that nearly as much as the table router which is what I use the most. The most expensive part of the trim router is having to buy 1/4" shank bits. I had mostly 1/2" shank bits.
RE: Should I get rid of my old Bosch router? - Juss1 - 03-31-2021
Unless you’re really hurting for space I wouldn’t get rid of it. You won’t get the value for it imo. Plus I’m the future if there’s a bit you use constantly you can always have that router dedicated to it
RE: Should I get rid of my old Bosch router? - Tapper - 03-31-2021
There is no such thing as "too many routers!" DAMHIKT!!!
Doug
RE: Should I get rid of my old Bosch router? - MT Woodworker - 04-01-2021
Plus 1 on that
I do not like to change routers. One on the table, one on the D handle, one on the plunge, one on the circle cutting jig....
RE: Should I get rid of my old Bosch router? - paulWoodworker - 04-01-2021
Keep it.
The Bosch will have more power.
You could use the Bosch router as a dedicated router for a router table.
Maybe sometimes the battery on your battery powered one is not charged.
Personally,I don't like battery powered power tools.. they have a much shorter lifespan and the battery runs out at the most inapportune time.
That said, unless you really really need the money, why would you sell the Bosch? You probably wouldn't be able to replace it for what you sold it for.
Keep it.. Maybe in a few years, you'll be really glad you kept it.
RE: Should I get rid of my old Bosch router? - stav - 04-02-2021
I also work outside so I'm a kindred spirit in that regard. I don't generally prefer battery operated tools because it is much more difficult to just jump into something when you find a free minute if you need to charge up batteries. I do have battery tools but I also have corded versions as well. I'd keep it.
RE: Should I get rid of my old Bosch router? - KyleD - 04-04-2021
Does that Makita router accept a 1/2 inch bit?
If not and you are like most of us and have a collection of 1/2 inch bits you should keep a router on hand that can swing them.