+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Something to show off... (/showthread.php?tid=7366859)
RE: Something to show off... - Scoony - 01-02-2022
Current project:
[attachment=39701]
[attachment=39702]
[attachment=39703]
I really need a new draw knife.
RE: Something to show off... - Admiral - 01-03-2022
Ok, I'll bite. Record #778, two support posts for fence, most robust version of the 78 out there. Works very, very well.
RE: Something to show off... - bandit571 - 01-07-2022
Cleaning up a tray...
[attachment=39800]
And, the rest of the clean up tools used..today..
[attachment=39801]
Size the tool to the size of the work being done...
RE: Something to show off... - Arlin Eastman - 01-12-2022
(12-31-2021, 07:12 AM)C. in Indy Wrote: OK, here's a coffin plane from a while back that came back into "decent" working order
Chris
There is something wrong with your plane blade. The shavings have to many holes in them.
RE: Something to show off... - C. in Indy - 01-13-2022
Good catch, Arlin!
I'll return the plane to the mfgr. immediately!
Chris
RE: Something to show off... - bandit571 - 01-15-2022
Taken on a Shake Down Cruise...after getting a "re-fit"
[attachment=39979]
Iron still needs a bit of work....we do have a "Stand-by" on hand..
[attachment=39980]
Stanley No. 7c, Type 9.....while I work on the iron in that Stanley No. 8c, Type 19....
RE: Something to show off... - bandit571 - 01-18-2022
Had a Sargent No. 3416 that needed cleaned up a bit...
[attachment=40031]
So....
[attachment=40032]
Then gave it a test drive....
[attachment=40033]
And found out it has a cambered iron....this IS a Jack plane, after all.
RE: Something to show off... - AHill - 01-19-2022
Shortly after I finished my wall hanging tool cabinet.
RE: Something to show off... - Hank Knight - 01-19-2022
![[Image: 42457834515_3c1fadb75c_k.jpg]](https://live.staticflickr.com/1810/42457834515_3c1fadb75c_k.jpg)
IMG_1294 by Hank Knight, on Flickr
RE: Something to show off... - Arlin Eastman - 01-21-2022
(01-13-2022, 08:56 AM)C. in Indy Wrote: Good catch, Arlin!
I'll return the plane to the mfgr. immediately!
Chris
I could fix it for you so it does not do that anymore.