(11-21-2017, 05:37 PM)K. L McReynolds Wrote: Way back, there was a TV show called Warehouse Warriors on cable...

I do remember this well.  I was a green newbie on this site.  I thought you guys were gods.  And then I got to know you.  

(11-21-2017, 05:37 PM)K. L McReynolds Wrote: Way back, there was a TV show called Warehouse Warriors on cable. The premise was two teams of a connected group(family/job/church/etc.) went to the set---an actual warehouse separated by a huge sliding door---which had a full woodshop set up. There was a host(Ed Del Grande), two 'carpenters' and two film crews. Each team was given a project and 8 hours in which to complete the project.

I forget who first posted about the show, but it struck me this would be a perfect idea for us here on WoodNet to try. Found out what was needed to apply. A demo video along with still photo's of the team members and bio's was necessary. Did not take much for Trosey(Texas), Doc(Illinois), and Missouri Sawdust(Peculiar, Mo.) to volunteer to come to Kansas City to make a demo.

Turns out the show did not have another team in the wings and asked if we could find two more(teams of three with an alternate) for a total of six and compete against each other. The POC at the show office was so excited we had applied(real woodworkers connected only by the internet), she never watched the demo.


So,  the word went out and two more volunteered. I am ashamed to say I cannot remember names(HELP Mo SAW!!), but one of the fellas worked for Delta Tool Company.

We had a ball. The show staff loved us and said if we ever wanted to come back, they'd love to have us(the show was cancelled the following year
).

The six of us, three in red shirts and three in blue went out for beers and eats---the folks in the restaurant thought we were a bowling team.


 

The show gave us tapes(VCR) of our episode. I had about 30 made and shipped to folks, mine is somewhere. I cannot find the pictures we took, but have this:

Quote:Rookie's Bad Idea of the Day
Under no circumstances should you attempt to vacuum the dust off your 80,000 BTU propane heater with a brush attachment while it's on. But you probably knew that.... 

don't over tighten your mortise attachement to your DP; it will break.   While we're on drill presses, if you happen to get one of the new Shop Fox drill presses, don't leave the handles on when using the oscillating feature. It will break... (THAT'S why it warns you to take them off about 5 times in the manual!) 

After applying a fresh coat of poly on a piece that is near perfect, DON'T decide to blow some sawdust off the workbench it's resting on. Yeah I know that leads to DON'T apply a fresh coat of poly on a workbench that has sawdust on it........   

Don't try buffing your finger tips on the Delta stationary belt sander. Go to your wife's manicurist for that job. 

When you cut the cord on your circular saw, remember. Try not to do it twice.   

When cutting lap joints for a frame - Try not to do a test cut on the wrong side one of the final pieces already cut to length and rabbeted.   

Try really really hard to not put your dado stack on the tablesaw backwards and then wonder why you can smell wood burning.   

When you lay the two sides of a bookcase together in order to rout the dados for the shelves at the same time, try to mark the top and bottom of the sides. Failing to do that, try to notice the alignment of the shelves before adding the brads "to hold it until the glue dries."   

When cutting pieces for two or more of the same project, cut the same amount of each side/piece. Three piece A and one piece B don't fit. 

Check another power tool in your shop before you take in your belt sander for a service because it suddenly stopped working during a local power blackout.  And control yourself when the tech smirks a little when he hands it back to you.   

When drilling for shelf supports in the side of a carcass, it's a good idea to take into account the brad point on the end of the bit when gauging the depth.  In case you've already drilled too far, Elmer's carpenter's wood filler does not fix the little holes very well.  

(11-22-2017, 11:12 AM)Cian Wrote: Another flashback:



I was chatting with Patsfan, and noted when I joined Woodnet nearly 15 years ago, I personally never imagined then how much this place would become a staple part of some of our lives.