+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Jet Model afs-1000b air filter repair (/showthread.php?tid=7338557)
RE: Jet Model afs-1000b air filter repair - toolmiser - 04-09-2018
(04-07-2018, 10:53 PM)packerguy® Wrote: Can you post a pic of the board? Id hate to see you drop a c-note if you dont have to.
Excuse my soldering skills, I even re soldered them today thinking that was the issue. (I know I didn't "prune" the excess leads either) I tried a second capacitor and that didn't do anything. The board doesn't seem to do anything. There is power on the board but nothing lights up. Thanks.
"wife here.... photo loading better!"
![[Image: okzdea.jpg]](http://i67.tinypic.com/okzdea.jpg)
![[Image: n4az3m.jpg]](http://i68.tinypic.com/n4az3m.jpg)
RE: Jet Model afs-1000b air filter repair - packerguy® - 04-09-2018
It appears the you might have soldered the tail from the cap across another via (to the right), causing a short. There appears to be what looks like that.....make sure you snip off the tail....and try to run it again.
Nothing else looks wrong, visually.
RE: Jet Model afs-1000b air filter repair - SallyR - 03-04-2021
I just got a Jet air filter for free. It runs, but only on high. So the motor works and I can turn it on and off. What would I have to replace to get it to go onto low and medium speed?