+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Drilling hole slightly larger than 3/4 inch (/showthread.php?tid=7338820)
RE: Drilling hole slightly larger than 3/4 inch - mdhills - 04-13-2018
Would you be able to shim the shank of the drillpress so it drills a bit out?
RE: Drilling hole slightly larger than 3/4 inch - cvillewood - 04-13-2018
Drill it at 3/4, drill press with sanding drum to oversized it. Done, KISS.
RE: Drilling hole slightly larger than 3/4 inch - crokett™ - 04-13-2018
I'd think somebody who goes by the handle "Engineer" wouldn't need to ask.
RE: Drilling hole slightly larger than 3/4 inch - Large Wooden Badger - 04-13-2018
What does driving a train have to do with drilling holes?
RE: Drilling hole slightly larger than 3/4 inch - Stwood_ - 04-13-2018
(04-13-2018, 03:21 PM)Large Wooden Badger Wrote: What does driving a train have to do with drilling holes?
RE: Drilling hole slightly larger than 3/4 inch - BobW - 04-13-2018
Yesterday I couldn't even spell injunear, now......well, you know
RE: Drilling hole slightly larger than 3/4 inch - Richard D. - 04-13-2018
I'll guess electrical engineer.
RE: Drilling hole slightly larger than 3/4 inch - Arlin Eastman - 04-13-2018
Well I do not know if you plan on using a drill press but here is a place I get my MT bits from and they go Metric and Standard up to 3" down to 3/64 or .5mil to 40mil
Here is the metric ones
http://www.wttool.com/index/page/category/category_id/14461/
and here are the Standard ones
http://www.wttool.com/index/page/category/category_id/14495/
Here are some just basic Jobber bits for a drill
http://www.wttool.com/index/page/category/category_id/14392/#product_listing=%3Fcurrent_page%3D3%26results_per_page%3D20%26order_by%3D%26search_params%3D
http://www.wttool.com/index/page/category/category_id/14393/
http://www.wttool.com/index/page/category/category_id/14394/
http://www.wttool.com/index/page/category/category_id/14392/
http://www.wttool.com/index/page/category/category_id/14434/#product_listing=%3Fcurrent_page%3D3%26results_per_page%3D20%26order_by%3D%26search_params%3D
RE: Drilling hole slightly larger than 3/4 inch - tomsteve - 04-17-2018
(04-13-2018, 01:39 PM)cvillewood Wrote: Drill it at 3/4, drill press with sanding drum to oversized it. Done, KISS.
with a user name of engineer, KISS probably isnt complicated enough. this is going to require rocket science.
RE: Drilling hole slightly larger than 3/4 inch - JTTHECLOCKMAN - 04-17-2018
(04-13-2018, 01:39 PM)cvillewood Wrote: Drill it at 3/4, drill press with sanding drum to oversized it. Done, KISS.
Hey I am taking credit for this 2 pages ago. But boy so many people like spending extra money here. Especially when it is not theirs.
