Woodnet Forums
Is a jointer useless without a planer? - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Is a jointer useless without a planer? (/showthread.php?tid=7339784)

Pages: 1 2 3


RE: Is a jointer useless without a planer? - Admiral - 05-29-2018

(05-29-2018, 01:56 PM)nickm62388 Wrote: I appreciate all the input, I also sorta realized question why my jointer has blade depth between 1/8-1/2....I feel if you try to shave off more then 1/8 at one time it will just jam....It jammed and over heated trying to do 1/4 shave on the jointer. I feel its nearly impossible if I tried jointing face or edge with the depth at more then 1/4... If I put the depth to 1/2, as soon as the wood touched the blade, I feel it'd stop and jam.

I have mine set at about 3/32nds ever since I bought it.  More passes, but better surface.


RE: Is a jointer useless without a planer? - DaveParkis - 05-31-2018

You might also check and see if there is a woodworking club near you. Yearly dues are usually not very much and besides getting access to the machines you'll also get access to a lot of help.