+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: HF grinder nut question (/showthread.php?tid=7346534)
RE: HF grinder nut question - castguy2003 - 02-20-2019
(02-20-2019, 07:17 PM)®smpr_fi_mac® Wrote: Hmmm.
The tech said it's 1/2-13, but I have a 1/2-13 nut that jams. I'll try to find that metric nut and see it if it works.
If I can't find it...looks like a Rikon slow speed grinder is in the works.
If you know someone with a cnc machine shop they could single point thread a new nut of any pitch.
RE: HF grinder nut question - SceneryMaker - 02-20-2019
(02-20-2019, 07:58 PM)castguy2003 Wrote: If you know someone with a cnc machine shop they could single point thread a new nut of any pitch.
which would cost at least as much as the grinder did originally, currently $50.
RE: HF grinder nut question - rednoblue - 02-21-2019
Do you just need the one?
If the metric does not work, I will send you a 1/2-12 nut to try.
(Not reverse thread)
RE: HF grinder nut question - ®smpr_fi_mac® - 02-21-2019
Yup. Just need one. Right hand thread
Will a 1/2-13 start to thread before jamming on a 12-1/2 thread?
RE: HF grinder nut question - rednoblue - 02-21-2019
(02-21-2019, 07:44 PM)®smpr_fi_mac® Wrote: Yup. Just need one. Right hand thread
Will a 1/2-13 start to thread before jamming on a 12-1/2 thread?
yes, that's what it does on mine. I can start a 1/2-13 but it jams. the 1/2-12 works perfect.
The metric I tried jams also.
RE: HF grinder nut question - rednoblue - 02-21-2019
pm me your address and i will drop it in the mail.
RE: HF grinder nut question - Roly - 02-22-2019
Did you ever measure the threads like Timberwolf suggested ? Roly
RE: HF grinder nut question - ®smpr_fi_mac® - 02-22-2019
Do I read this as 1/2-12?
RE: HF grinder nut question - Roly - 02-22-2019
(02-22-2019, 09:35 PM)®smpr_fi_mac® Wrote: Do I read this as 1/2-12?YES. Roly
RE: HF grinder nut question - ®smpr_fi_mac® - 02-23-2019
rednoblue,
I tried to message you, but your account has them turned off; I can't send one to you.