+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Filter advice for shop-built air scrubber? (/showthread.php?tid=7351184)
RE: Filter advice for shop-built air scrubber? - fishhh4 - 11-17-2019
I have a whole bunch of merv 11 filter media. I find that is too fine for 1st stage cleaning. I built two frames that are for my overhead air cleaners. I also built two frames for my furnace forced air.
I bought a lifetime supply lets say...
I bought something like this.What I have is merv 11
RE: Filter advice for shop-built air scrubber? - Cooler - 11-18-2019
(11-17-2019, 09:52 AM)fishhh4 Wrote: I have a whole bunch of merv 11 filter media. I find that is too fine for 1st stage cleaning. I built two frames that are for my overhead air cleaners. I also built two frames for my furnace forced air.
I bought a lifetime supply lets say...
??? Seems to be MERV 8
Product description
'Here are some important details for Air Handler Filter Media Roll. Media Roll Width: 25", Merv: 8.'
RE: Filter advice for shop-built air scrubber? - ®smpr_fi_mac® - 11-18-2019
Cooler, that's a link for 8.
He bought 11, though.
RE: Filter advice for shop-built air scrubber? - Admiral - 11-18-2019
(11-16-2019, 10:12 PM)®smpr_fi_mac® Wrote: Admiral,Cool, looking forward to the link.
This will be thre first video build I plan on making for my soon-to-be YouTube channel.
RE: Filter advice for shop-built air scrubber? - Cooler - 11-19-2019
(11-18-2019, 08:40 AM)®smpr_fi_mac® Wrote: Cooler, that's a link for 8.That is the link he provided. I only looked at it. I assume he ordered from that link that he provided.
He bought 11, though.
RE: Filter advice for shop-built air scrubber? - ®smpr_fi_mac® - 11-19-2019
Yes, but he wrote the link to show that he purchased the 11.
RE: Filter advice for shop-built air scrubber? - ®smpr_fi_mac® - 11-23-2019
My filters have come in so I designed the box. All material is 3/4" ply. It's big because I'm using big filters. I don't mind, as I have a 12' ceiling, so it'll be out of the way.
Over all height is 31-7/8", width is 35", and length is 31". I think the model in Sketchup is about 6' tall, hopefully giving a sense of scale.
I haven't designed the opening for the blower exhaust; that's be done after I build the carcass and place the blower in so I can mark it directly from the exhaust.
RE: Filter advice for shop-built air scrubber? - ®smpr_fi_mac® - 11-23-2019
Cut list for the project:
RE: Filter advice for shop-built air scrubber? - ®smpr_fi_mac® - 01-04-2020
Started building it last night. Went overboard with 3/4 cabinet grade ply, but oh well. Two sheets, with some left over.
When done it'll have three sets of filters.
RE: Filter advice for shop-built air scrubber? - fredhargis - 01-05-2020
Well done. I'm not sure I saw this above, will it be hanging or sitting on the floor?