+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Broken bandsaw blade repair? (/showthread.php?tid=7351962)
RE: Broken bandsaw blade repair? - Bob Vaughan - 01-29-2020
(01-27-2020, 05:59 PM)John Mihich Wrote: I tried SS and just couldn't get it to stay. I watched a video on using a tig welder. I will try that next.
You could try it this way
http://owwm.org/viewtopic.php?t=33506
That 142" blade would work nicely on a vintage Delta 28-350 20" band saw.
RE: Broken bandsaw blade repair? - Timberwolf - 01-29-2020
(01-29-2020, 10:26 AM)Bob Vaughan Wrote: You could try it this way.............................
http://owwm.org/viewtopic.php?t=33506
That 142" blade would work nicely on a vintage Delta 28-350 20" band saw.
Good pics....I would just add that a "poker" can come in handy when dealing with really small blades...I just make one out of steel wire...clean and flux the tip and use it to "pick up" a small amount of molten solder and deposit it on the heated and fluxed joint..properly done, it will leave a clean joint that requires very little "dressing'.....