+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: How do I square one end of this blank? (/showthread.php?tid=7373246)
RE: How do I square one end of this blank? - Stwood_ - 06-28-2023
(06-25-2023, 12:45 PM)®smpr_fi_mac® Wrote: The Bosch won't cut all the way through, short by about an inch.
I was able to cut and rotate and get it close enough, leaving just a small corner uncut. I hit it with my router plane to clean up.
Yes, has to be rotated. I never had a problem doing that.
The only circle saw next size up that will make one cut through a 6x6 is a 14"-16" RAS. Those can be picked up dirt cheap, discarded from the older lumber yards. 3PH.....
Add another tool to your arsenal.
![[Image: yellowbiggrin.gif]](https://forums.woodnet.net/images/graemlins/yellowbiggrin.gif)
RE: How do I square one end of this blank? - ®smpr_fi_mac® - 06-29-2023
(06-28-2023, 02:41 PM)Stwood_ Wrote: Yes, has to be rotated. I never had a problem doing that.
The only circle saw next size up that will make one cut through a 6x6 is a 14"-16" RAS. Those can be picked up dirt cheap, discarded from the older lumber yards. 3PH.....
Add another tool to your arsenal.
When I build a bigger shop a 14-16" RAS will be added, but I got rid of my Dewalt 1030 last year due to space limitations...and because this SCMS can cut deeper.
RE: How do I square one end of this blank? - Stwood_ - 07-04-2023
Yes, 14-16's are valuable when working with big stock