+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Post pics of your homemade tools (/showthread.php?tid=6617072)
Re: Post pics of your homemade tools - BaileyNo5 - 01-03-2014
No argument here regarding the importance of timely doses of caffeine.....but isn't that coffee cup sitting on the BENCH? Once again, the bench plays a critical role!
titanxt said:
BaileyNo5,
I will respectfully have to disagree... The most important tool in the shop would have to be the coffee cup - without it you would not be able to hold the coffee....
Re: Post pics of your homemade tools - titanxt - 01-03-2014
Very well spotted!!!
Andy
Re: Post pics of your homemade tools - JesseM - 01-03-2014
I'm a little late to the party. So many good ideas in here.
Got a lot of user made tools, so I will be selective. This first is not really a tool, but a recent build to hold tools off the bench. The bottom pic is one of my most used tools, the panel gauge. The pencil is when I don't care about accuracy, and I have a scoring attachment for when I do.
Re: Post pics of your homemade tools - Window Guy - 01-03-2014
titanxt said:
BaileyNo5,
I will respectfully have to disagree... The most important tool in the shop would have to be the coffee cup - without it you would not be able to hold the coffee....
......... that's a great line. I usually just take water with me when I am out in the shop.Steve
Re: Post pics of your homemade tools - Boatman53 - 01-03-2014
I modify tools as needed to get a job done but here are a few I made.
Adjustable marking gauge for planking.
A little bronze hammer.
At the risk of outing myself here is a router plane.
A small bench to work on inside a boat.
A couple of knives.
A handheld drill chuck.
A sine bar for setting precsion angles in the table saw.
And a workbench.
I'm sure there are others but no photos yet. Many tools re-handled.
Jim
Re: Post pics of your homemade tools - shoottx - 01-04-2014
Boatman53 said:
At the risk of outing myself here is a router plane.
Jim
Yup, you did it, although i was pretty sure you were the Secret Santa. The wood, craftsmanship and the return address had me convinced.
And the plane is beautiful! It is so nice I don't want to take out from under the tree. Thanks again!
Re: Post pics of your homemade tools - RokJok - 01-04-2014
Many thanks to all who have posted pics of your inspiring craftsmanship. Much appreciated!!
Quote:Jim, what are the dimensions of that bench, please? TIA.
A small bench to work on inside a boat.
Re: Post pics of your homemade tools - AHill - 01-04-2014
I made these for my SS recipient this year. They are cocobolo handled screwdrivers, using the Lee Valley lifetime screwdriver shafts. The ferrules are 1/2" brass plumbing couplers.
Re: Post pics of your homemade tools - JLH - 01-04-2014
Awesome thread!!! Thanks for thinking of this.
Even seen the spokeshave I received last year from my SS.
Re: Post pics of your homemade tools - Derek Cohen - 01-04-2014
Here are a few more ...
Joinery saw (11") and Carcase saw (14"), both crosscut:
Jarrah brace and driver in presentation box (with drawer for bits) ...
A mallet for mortice chisels ...
Chip carving knives (made as a gift) in a presentation box ..
Many, many marking knives and scratch awls ..
More later.
Regards from Perth
Derek