+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Boss wants a Pantry Cupboard (/showthread.php?tid=7330423)
RE: Boss wants a Pantry Cupboard - bandit571 - 06-18-2017
Got home this evening.....will need a bit of time to get a few pictures done, but.....had a LOT of fun. Came home with way more than I left with.
Brought home 1/2 a pick-up's bed of Maple and Poplar boards....the driver had the other 1/2 of the bed of the truck.
Yet, I still have to go out, pick two 1 x 10s to make a glued up panel to turn into matched doors for the Pantry Cupboard Project.....
BTW: Came home with a few saws, a Stanley #8, a Millers Falls #11, and a small, 6" sweep brace. Along with a couple other toys..er...TOOLS.
Looking forward to next years get together.....
RE: Boss wants a Pantry Cupboard - Steve N - 06-19-2017
(06-12-2017, 05:33 PM)bandit571 Wrote: A PANTRY Cupboard, mind you.
Doors will wait another week....have a "Field Trip" to go to. Just over 400 miles each way. Needed a sign made, to tell where I can from..
NEVER work in the shop on a Monday...."J" is bass-ackwards...
Needed a pilot hole drilled, to hang the sign on the post,
And a countersink..
Bought the letters, nailed them inplace after a paint job..
Will add the mileage in sharpie, once I get there. Taken right off the odometer.
There will be pole set up, like the one on MASH 4077th. Showing which direction and how far away.
Greetings, saw your sign.
![[Image: sign%20board_zpsytbjtgwe.jpg]](http://s476.photobucket.com/user/Geopicz54/media/Woodworking/sign%20board_zpsytbjtgwe.jpg.html)
Back when I lived in Tipp City LOML and I used to play a lot of Racquetball. Bellfointaine was on our "tournament trail" They have/had a racket club there and the walls were poured, concrete, stucco, or something. They were also pitted badly, with a few courts with large chunks out of them. It was wild, you would have to try not to hit a defect, or Lord knew where you ball was gonna shebang off, and just head to anyplace, but usually not where you intended. Beyond you can't get there from here, that is all I knew about Bellfountaine. Saw the sign, figured I'd say hello.
Enjoyed your build as well.
RE: Boss wants a Pantry Cupboard - bandit571 - 06-19-2017
Club is gone. Now is a home for people making wire harnesses for Honda.
Tease from today...
[attachment=2781]
Stearns 85...
[attachment=2782]
Stanley 6" sweep brace....
[attachment=2783]
Millers falls No.11 needs a cutter....
[attachment=2784]
The No.8 will be a bit of work....
[attachment=2785]
maybe...
RE: Boss wants a Pantry Cupboard - bandit571 - 06-19-2017
Ok, back to the Pantry Project..
Two 1 x 10 x 72" pine boards are sitting in my van.....thunderstorm making it a bit rough to bring them into the shop..
Hinges have been bought, Boss has approved of them
A latch to keep the doors shut, and the Riff-Raff out, has also been bought.
Maybe tomorrow, I can sneak the boards into the shop, decide which one to rip right down the middle. The halves will then be glued up to the other 2 boards.....to make the halves for the doors. Need to crosscut for length, and add a rebate along the edges of the ripped part of each door, so they will overlap a bit. Final width will be taken from the outside edges. After that, we'll see....
RE: Boss wants a Pantry Cupboard - bandit571 - 06-21-2017
Waiting on glue to dry..door #1
[attachment=2831]
Door #2 is waiting to be trimmed and glued up..
[attachment=2832]
Added cauls to keep things flat....less plane work..
[attachment=2833]
Now I have to wait on the glue to cure....stay tuned..
RE: Boss wants a Pantry Cupboard - Stwood_ - 06-21-2017
[attachment=2834]
RE: Boss wants a Pantry Cupboard - bandit571 - 06-21-2017
Well, Door#1 is out of the clamps, and needed an edge jointed...
[attachment=2841]
That Stanley No. 8 I recently fixed up seems to be doing it's job..
[attachment=2842]
Once this edge was straight, and saw-mark free, I could set up another type of plane..
Stanley No.45, Type 20 SW......The fence is set below the cutter...
[attachment=2844]
As the cutter was a little too wide. Easier to just set the fence, when making a few of these..
[attachment=2845]
being a busy day, again. I hear a couple Guinness Draughts calling me name......ice cold ones, at that.
"Time, Gentlemen, Please!"
RE: Boss wants a Pantry Cupboard - Stwood_ - 06-21-2017
RE: Boss wants a Pantry Cupboard - bandit571 - 06-22-2017
Door #1.....
Took a couple tries to size it to the opening. Squared one end, haul it upstairs to the pantry....mark a cut line, saw the cut line. Couple long hand planes to flatten the glue-lines. A block plane to ease the corners...haul it back upstairs........it fits!
Decided to install the hinges...
[attachment=2859]
Top two were not that bad to do....but that third hinge
I can no longer work while kneeling on me knees....went and got a plastic table/stool from the patio. yep, soon as my rearend settled onto the "seat", it broke. I fall backwards, hitting the corner of the Kitchen Island with me shoulder, on the way to the floor....( that's going to leave a mark...
) Finally got back up off the floor,,,,went and got a regular chair that could hold me, and installed the third hinge. Hmmm, thought I bought 6 hinges....why do I only count 4? 
Senior moment? means another trip to the BORG for two more hinges 
been that kind of a day..Ok, went back to the shop, had to keep moving, lest things stiffen up. Cleared the top of the bench..
[attachment=2860]
Marked a line to cut the last 1x 10 to length. Somehow cut it without any foulups....decided which edge would be best to glue to, and ran the jointer for a bit..
[attachment=2861]
Shoulder seemed to like running the 0-7 better than the No. 8 Stanley....tried both, anyway.
Had to clean the nozzle on the bottle of glue, before I could glue things up..
[attachment=2862]
Added the three cauls to keep things level at the glue line....one of them days..
[attachment=2863]
One of the clamps for the cauls was too long, I couldn't get my fat body through there. Grrr, went and found a welding"C" clamp instead of the visegrip clamp. Now I can get through, past the washer, and out of the shop....think I will just sit for a while.....maybe a cold one, or two?
Once the glue cures out, I can do all the things I did to Door #1, have to remember which side the rebate goes on. Maybe get a package of hinges, too?
Just one of them days....
RE: Boss wants a Pantry Cupboard - BpB123 - 06-22-2017
Thanks for the build-along ... I am really enjoying it!