Woodnet Forums
The new Mikiespace - 40X64X16 Pole Barn - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: The new Mikiespace - 40X64X16 Pole Barn (/showthread.php?tid=6805621)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

RE: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 05-20-2018

#2 is up

[Image: IMG_20180519_201407_01_zpsj7jsyttm.jpg]

RE: The new Mikiespace - 40X64X16 Pole Barn - Stwood_ - 05-20-2018

Did you install a variable speed switch or a regular on/off

RE: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 05-21-2018

(05-20-2018, 07:59 PM)Stwood_ Wrote: Did you install a variable speed switch or a regular on/off

The fans have an RF remote. It has 4 dip switches so you can program the remote up to 16 different frequencies. The fans require a disconnect to allow the remote frequency to pair with a fan. I am just using the remotes and not hardwired wall switches. I just wired them to four of ceiling 120V circuits.

The fans have 6 remote selectable speeds and you can also reverse direction and shut them off from the remote. So all individually controlled with 6 speeds and reverse.\
As soon as I figure out the frequency on them, if I can bridge that to wifi, I will automate that with a phone app and/or amazon echo. For now the remotes work just fine and I really don't plan to change the direction or speed much. Set it and forget it till winter.


BTW - fans three and four are up.

[Image: MVIMG_20180520_230759_zpswt6pgzjm.jpg]

RE: The new Mikiespace - 40X64X16 Pole Barn - Admiral - 05-21-2018

(05-21-2018, 07:40 AM)BloomingtonMike Wrote: BTW - fans three and four are up[Image: MVIMG_20180520_230759_zpswt6pgzjm.jpg]

It just keeps getting better and better.  Where's the sauna going? 
Smile

RE: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 05-21-2018

(05-21-2018, 12:39 PM)Admiral Wrote: It just keeps getting better and better.  Where's the sauna going? 
Smile

Would you believe the neighbor offered me a free hot tub LOL. Not sure I want it!!

RE: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 05-21-2018

Anyone need some plywood? I am ready to sell some extra.

RE: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 05-26-2018

Latest update.

Installed mini blinds on doors and windows and got rid of insulation covering them.

Got the cnc mill's air and power run to ceiling and got it back up and running. Also got the 1340 metal lathe moved ove.

[Image: IMG_1527355836923_zpsytdwwwex.jpg]

RE: The new Mikiespace - 40X64X16 Pole Barn - Stwood_ - 05-26-2018


Cool 

Hey I see a grease spot on the floor....

RE: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 05-26-2018

Grease, oil, rust water, wd40 popcorn oil, whatever it takes.

RE: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 05-28-2018

Got some metal tools cleaned up and moved in the new shed. Got their above tool access power and air lines ran to them. No cords on the floor.

[Image: MVIMG_20180528_141818_zpscl1c8mqd.jpg]

[Image: MVIMG_20180528_141842_zpslazvllmk.jpg]

[Image: IMG_20180528_141851_zpsq8yndei4.jpg]

[Image: MVIMG_20180528_141900_zps6mxzdgsu.jpg]

[Image: MVIMG_20180528_141908_zpsfdl3i3zh.jpg]