+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Miter saw acting weird (re-titled thread) (/showthread.php?tid=7345043)
RE: Miter saw acting weird (re-titled thread) - Stwood_ - 12-17-2018
You may have to dremel out the screw holes a bit. It should have a dab of play.
If you force it back far enough, it may stay. Who knows......
RE: Miter saw acting weird (re-titled thread) - KingwoodFan1989 - 12-17-2018
Hopefully I can get back in touch with that same rep at DeWalt in the next couple of days, or at least reach someone who won't try to immediately dismiss me to Amazon. My intent wasn't even to exchange the whole tool...the rest of it works pretty much perfectly. I guess the guy must have misunderstood me or just didn't feel like going the whole nine yards with this, because I remember Bosch was REALLY good about sending replacement parts with something I got from them. Granted, that sander didn't end up working out, but the point is, I got that tool off of Amazon as well, and they still sent me replacement stuff before ever telling me to go back to Amazon. Hopefully this situation doesn't end up with the tool not working out like with that sander.
RE: Miter saw acting weird (re-titled thread) - Stwood_ - 12-17-2018
I'd rather fix it (20 minute fix?) than deal with boxing the darn thing up, getting the del man to get it picked up, then have to await another saw, unbox and set that one up.
Now if it was totally foofoo'ed, yea I would send it back.
RE: Miter saw acting weird (re-titled thread) - Steve in Nova Scotia - 12-17-2018
Just my thoughts, but I don't see the c-clamp trick working with countersunk head machine bolts, I think the corresponding countersink in the fence will continue to draw the fence back to the same original position. Plus, if it did work, who's to say if it won't push the fence faces out of the same plane. Honestly, if you are determined to fix this yourself (Yes I know, there are many people here who think it should be returned, I'm NOT disputing this!), I would look at having the fence face re-machined, then reinstall and true things up using your miter detent plate adjustment. But first....is the discrepancy the same when you remove the fence from the saw? If not, there would be no way to jig up the fence to machine it accurately, as it would just again move when re-installed...something to check first.
But...the clamp is certainly worth a try...
Steve
RE: Miter saw acting weird (re-titled thread) - Steve in Nova Scotia - 12-17-2018
(12-17-2018, 08:47 PM)Stwood_ Wrote: I'd rather fix it (20 minute fix?) than deal with boxing the darn thing up, getting the del man to get it picked up, then have to await another saw, unbox and set that one up.
Now if it was totally foofoo'ed, yea I would send it back.
I'm of the same mind, if it's a relatively simple fix, and the tool is otherwise sound.
RE: Miter saw acting weird (re-titled thread) - Stwood_ - 12-17-2018
At the risk of foofoo'in one of my 708's fence adjustment up (Yea, I clamped it down first), I removed 2 of the fence screws on the right side. There is a 1/16" play to move the fence. Mine will move forward, but not backwards, as the slop in the hole on mine is on the back of the fence hole.
So depending on where your fence is on the table...........you may have to reduce the screwhead diameter, which would be a simple fix.
I'd still opt to get the new fence from Dewalt. But until then....
RE: Miter saw acting weird (re-titled thread) - Stwood_ - 12-17-2018
(12-17-2018, 08:48 PM)Steve in Nova Scotia Wrote: Just my thoughts, but I don't see the c-clamp trick working with countersunk head machine bolts
They are not countersunk, unless his new 709 has changed.
RE: Miter saw acting weird (re-titled thread) - Steve in Nova Scotia - 12-17-2018
(12-17-2018, 09:11 PM)Stwood_ Wrote: They are not countersunk, unless his new 709 has changed.
It was stated that they were countersunk...
RE: Miter saw acting weird (re-titled thread) - Steve in Nova Scotia - 12-17-2018
(12-17-2018, 09:15 PM)Steve in Nova Scotia Wrote: It was stated that they were countersunk...
Here:
"Stwood, looks simple enough, but are you sure it'll work even with the countersunk bolt inserts in the fence? And with that force in play, is there a chance the fence will snap back as soon as I remove the setup you showed me?"
RE: Miter saw acting weird (re-titled thread) - Stwood_ - 12-17-2018
(12-17-2018, 09:15 PM)Steve in Nova Scotia Wrote: It was stated that they were countersunk...
Not me.....
This whole thread has a sunk in it...somewhere.....