Restoring an Old Drill Press - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Restoring an Old Drill Press (/showthread.php?tid=4978276) |
RE: Restoring an Old Drill Press - Steve Evans - 02-01-2017 I took a look through the thread, and all the pictures appeared to be there. Thanks. Missed this when you posted it. Great thread RE: Restoring an Old Drill Press - LukeR - 03-07-2017 THANK YOU!!! The pictures have returned RE: Restoring an Old Drill Press - Steve N - 03-07-2017 Page 10 for the awesome results page. Bill that was rags to riches. Good to see this post around again. RE: Restoring an Old Drill Press - Philip1231 - 02-18-2018 This post certainly needs a bump. RE: Restoring an Old Drill Press - bennybmn - 02-19-2018 Agreed. I learned a LOT from it two years ago! I plan on referring to it again for my lathe. RE: Restoring an Old Drill Press - GRDavies - 03-17-2021 (07-26-2010, 07:28 PM)Is it possible to see the picture for of the restored drill spindle skizzo Wrote: With permission from Mac and encouragement from a few fellow Woodnetters, I’m going try something a little different here. A number of folks post information, discussion, photos, etc. of machinery restoration projects, typically in “before” and “after” condition, and occasionally with some questions while in process. But we don’t often get to follow along throughout the restoration process, looking over the shoulder so to speak. RE: Restoring an Old Drill Press - Tapper - 03-18-2021 (03-07-2017, 06:21 PM)Steve N Wrote: Page 10 for the awesome results page. Pics not working for me. Doug iMac running Catalina RE: Restoring an Old Drill Press - EdL - 03-19-2021 Back then the pics were hosted offsite, probably photobucket. Links are broken, long gone...... Ed RE: Restoring an Old Drill Press - skizzo - 03-20-2021 (03-18-2021, 11:57 PM)Tapper Wrote: Pics not working for me. I don't check in here very often any more, but I have the photos from this thread and the accompanying motor restoration thread available as zip files that I can email upon request. If you send me a PM with your email address, I should get a notification to come check it and I'll be glad to send you the file. It appears I may be able to go back in and edit this thread to add my photos back in, which I'll try to do some time when I get a few hours or days available. Bill. RE: Restoring an Old Drill Press - Timberwolf - 03-20-2021 (03-20-2021, 09:28 AM)skizzo Wrote: I don't check in here very often any more, but I have the photos from this thread and the accompanying motor restoration thread available as zip files that I can email upon request. If you send me a PM with your email address, I should get a notification to come check it and I'll be glad to send you the file............... Hi Bill.....Good to see you're still with us...come back more often!!! |