+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Richardson Brothers 14" backsaw (/showthread.php?tid=6557064)
Pages:
1
2
Richardson Brothers 14" backsaw - Blacky's Boy - 11-05-2013
I got this Richardson Brothers 14" backsaw off of SteveF about a year ago and I just finished it last night
I wish I had some more detailed "before" photos. But I must have misplaced them.
Cleaned up spine
Test fit:
Installing a new saw plate
Cleaning up the handle
Finished Product:
The handle was stripped then finished with some dark aniline dye followed by several coats of TruOil.
The new saw plat it 14ppi Rip with an 8 deg Rake. The saw plate was sanded to about 1500 and then polished with aluminum foil and Durosol.
Re: Richardson Brothers 14" backsaw - TobyC - 11-05-2013
Darker than I like but cool. What kind of wood?
Re: Richardson Brothers 14" backsaw - Blacky's Boy - 11-05-2013
Beech. But it was stained to be almost black when I got it. So I tried to restore it to the way it looked before. Next time I'm just bleaching it clean and then finishing it with TruOil
Re: Richardson Brothers 14" backsaw - ZachDillinger - 11-05-2013
I actually really like the dark handle. Nicely done!
Re: Richardson Brothers 14" backsaw - MarvW - 11-05-2013
Very nice restore job Dom. The dark color looks good on that saw.
Re: Richardson Brothers 14" backsaw - Blacky's Boy - 11-05-2013
Hey Marv,
Thanks for the compliments!
While I have your ear,
....have you ever noticed a saw plate bowing (just a tad) when the hardware is tightened down? I'm taking like, the saw plate it dead straight when installed in the spine and handle. But as soon as you start tightening down the hardware a real slight bow creeps in. Is this is an indication that one of the holes is a bit off? And we're not talking a huge bow. It's the tiniest of things. And it's right under the handle. So it's not in a super critical area (so to speak). But it's presence just bugs the CRAP out of me!
Your thoughts?
Re: Richardson Brothers 14" backsaw - Isaac S - 11-05-2013
Blacky's Boy said:
While I have your ear,
And we're not talking a huge bow. It's the tiniest of things. And it's right under the handle. So it's not in a super critical area (so to speak). But it's presence just bugs the CRAP out of me!
Your thoughts?
In my experience, that is caused by misalignment between the slot for the blade and the mortise for the spine, or by the slot for the blade being cut inaccurately. Since it is an old saw, it could also be caused by the cheeks of the handle having cupped or otherwise moved over the years.
Re: Richardson Brothers 14" backsaw - swagman - 11-05-2013
Blacky's Boy said:
Hey Marv,
Thanks for the compliments!
While I have your ear,
And we're not talking a huge bow. It's the tiniest of things. And it's right under the handle. So it's not in a super critical area (so to speak). But it's presence just bugs the CRAP out of me!
Your thoughts?
Very nice job Dom. The saw plate below the handle is usually the result of a vertical misalignment between the plate slot within the handle and the fit of the blade within the hardback creating a slight twist in the tooth line when all is assembled. If the back top corner of the blade extends past the back edge of the hardback and is caught within the handle slot at mortise level this slight bow is very difficult to remedy. Apart from checking to make sure the handle mortise is in proper alignment, what I can suggest is you try is the following. Remove the blade assembly from the handle. Use a straight edge and mark a horizontal line at the height of the bottom edge of the hardback through the overhanging blade that's captured within the handle slot. Also mark an intersecting vertical line to represent the back edge of the hardback fit. Now remove this small corner of saw plate with a file or dremel blade. You should be able to do this without having to remove the hardback from the saw plate. Refit the saw handle and see if the bowed saw plate under the handle has disappeared.
Stewie;
Re: Richardson Brothers 14" backsaw - tablesawtom - 11-05-2013
I have a whole pile od saws just waiting for you to restore them. Address please.
Just kidding, about restoring not about the pile. It looks really great.
Tom
Re: Richardson Brothers 14" backsaw - eg54string - 11-05-2013
Nice work.
Waiting for the "action" shot.
Eric.